#'s Matching 396, Correct Colors, Pw, Pl, Factory Air, Tilt, Build Sheet, Sleepe on 2040-cars

Auto blog

2021 Jeep Grand Cherokee L vs Big Three-Row Crossovers | Spec comparison

The three-row 2021 Jeep Grand Cherokee L is here, entering an ever-growing segment of big crossovers that Jeep has ignored since the Commander of the late 2000s. Of course, the Dodge Durango has basically been a three-row version of the current Grand Cherokee with Dodge styling and a different interior, so it's not like The Corporate Entity Formerly Known as Chrysler has been without a contender in the segment. Jeep is a stronger brand than Dodge, however, and the three-row midsize segment is stronger than those with two rows (there's a vast sales difference between the Chevrolet Traverse and Blazer, as well as the Honda Pilot and Passport). In other words, the Grand Cherokee L could be a very big deal. It is also, quite literally, a very big deal. As you're about to see, it is now the largest three-row crossover, besting the length, wheelbase and height of even the gargantuan Traverse. There's more to the story than that, however, so we put together the below comparison chart to show you how the new Grand Cherokee L lines up on paper versus the biggest three-row crossovers. That includes the 2021 Ford Explorer, 2021 Kia Telluride, 2021 Hyundai Palisade and 2022 Chevrolet Traverse. This group also represents some of the strongest entries in the segment as well as those we feel are most likely to be considered alongside the big Jeep. To that end, we also included the 2021 Lincoln Aviator in the chart since its base price is actually less than what we anticipate the luxurious, range-topping Grand Cherokee L Overland and Summit trim levels to start.  Engines and drivetrains Note the differences in curb weight here. The Grand Cherokee L has the highest base curb weight of the group apart from the high-lux Aviator, yet its 3.6-liter V6 has the least amount of power and torque. Therefore, it'll be surprising if it's not the slowest in the group. There's of course the Hemi V8 available on the top Overland and Summit trim levels, but again, a hefty curb weight works against it. At 5,330 pounds, the lightest V8-powered JGCL weighs 600 pounds more than V6-power Explorer Platinum and ST models. On the other hand, nothing can touch the Hemi Jeep's towing capacity, and only the 400-hp Aviator betters the Jeep's base V6. Its 6,200-pound towing capacity greatly outdoes the 5,000-pound limits of not only the Telluride, Palisade and Traverse, but most others in the segment as well.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Lutz dishes dirt on GM in latest Autoline Detroit

Bob Lutz sits down for Autoline Detroit - Click above to watch video after the jump
Autoline Detroit recently played host to Bob Lutz, and, as is always the case, the former General Motors vice chairman dished out some great commentary. Lutz was promoting his new book Car Guys vs. Bean Counters: The Battle for the Soul of American Business, and talk quickly turned to his role as it related to product development and high-level decision making at GM. While on the topic of brand management, Lutz revealed a few rather interesting tidbits about his former employer:
All Chevrolet vehicles were required to have five-spoke aluminum wheels and a chrome band up front, as part of the Bowtie brand's overall image.