2012 Chevrolet Camaro Zl1 on 2040-cars

Auto blog

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

2016 Chevy Volt will have more EV range, bigger battery

Meet the new Volt, not the same as the old Volt. That appears to be the story when General Motors introduces the 2016 Chevy Volt at the Detroit Auto Show in January. Today we're getting some more details on the guts of the new plug-in hybrid, and it turns out they're going to be much improved from the current Volt, which first went on sale at the end of 2010. Sure, the first-gen Volt did get some improvements along the way (a slightly larger battery pack, lane departure warnings) but the new Volt – which will go on sale in the second half of 2015 – marks the first time GM has been able to return to the drawing board and really make the improvements that its customers want. That's how Larry Nitz, GM's executive director of vehicle electrification explained it to AutoblogGreen today when explaining the all-new Voltec extended range electric vehicle (EREV) powertrain. "In the Gen 2 is we gave the engine a little more power, a little more torque, a little more displacement, more capability." – Larry Nitz Nitz said that the new Volt will be better in almost every sense: a bigger battery, longer EV-only range, 20 percent better acceleration in the low speed range and higher overall efficiency. This is due, in part, to the Volt's two motors being able to both act as generators and power the car. As we noted this morning, the 2016 Volt will use a larger, 1.5-liter four-cylinder engine, a version of which is already used in the Chinese-market Cruze. Nitz said that this has a number of benefits, including more power and quieter operation. "Some people would say, why did you make [the first-gen engine] so big. I would say, why did you make it so small?" he said. "It works good, our customers love it, but the reality is that if you go a little bit off and use the car a little harder, you can get the engine to need to operate at a higher speed. In an EV, that's quite noticeable. So, what we did in the Gen 2 is we gave the engine a little more power, a little more torque, a little more displacement, more capability and what it has marginally enabled is not only is it more efficient but it's also quieter." Nitz wouldn't talk about how the new powertrain might affect the two other products that use the Volt's underpinnings – the Cadillac ELR and the Opel Ampera – but if you've got a quieter option, we assume that's something ELR drivers would enjoy. But that's a story for another day.

Honda, Chevy reveal low-drag speedway aero for Indy 500

As the two automakers currently participating in the IndyCar Series, both Chevy and Honda were invited this year not only to provide engines to the teams on the starting grid, but to develop their own aerodynamics packages as well. Both revealed their designs for the road-course races a few months ago, but with the Indy 500 approaching at break-neck speed, they've now unleashed their aero approaches for speedways. Both are based on the Dallara DW12 chassis introduced to the series a couple of years ago, but sacrifice some of their downforce at the altar of speed. And you can tell as much from looking at them: both Honda (above) and Chevy (below) have streamlined their designs, with single-plane front wings, lower-profile rear wings and fewer winglets on the body and around the wheels in between. The idea is to allow the cars to reach higher top speeds with less drag, while offering the necessary amount of downforce for the banked turns. With the four opening road-course rounds complete, teams using either automaker's equipment will keep the existing aero kits on their cars for the Grand Prix of Indianapolis on the infield course next week, then switch to the speedway package for the Indianapolis 500 later this month. Then it'll be back and forth for the rest of the season as the circus switches between road courses and speedways. Honda Unveils 2015 IndyCar Super Speedway Aero Kit Apr 30, 2015 - SPEEDWAY, Indiana - To be used at the Indianapolis 500 - Manufacturer seeking 11th Indianapolis 500 victory since 2004 - First public running to take place Sunday at Indianapolis Honda today debuted the "Super Speedway" aero kit of aerodynamic upgrades and components its teams will use at this year's 99th running of the Indianapolis 500. The Honda Super Speedway Aero Kit, produced by Honda Performance Development, Honda's racing arm in North America, includes a variety of individual aerodynamic components fitted to the existing Honda-powered Dallara Indy car chassis. All are intended to give Honda's six Indy car teams – encompassing a potential 17 '500' entrants - the ability to maximize performance at the 2.5-mile Indianapolis Motor Speedway oval and other large ovals ( over one mile in length) on the 2015 Verizon IndyCar Series schedule. "We're excited to unveil our Super Speedway aero kit, the newest element in this era of enhanced manufacturer competition in the Verizon IndyCar Series," said Art St. Cyr, president of HPD.