2011 Chevrolet Camaro Ls on 2040-cars

Auto blog

Junkyard Gem: 2003 Chevrolet Tracker

When General Motors created the Geo brand to sell vehicles designed and — in some cases — built by Japanese partners, the first four models were introduced for the 1989 model year: the Metro (Suzuki Cultus), Prizm (Toyota Sprinter), Spectrum (Isuzu Gemini) and Tracker (Suzuki Sidekick). Geo got the axe in 1997, with the Metro, Prizm and Tracker becoming Chevrolets. Of those, the Tracker survived the longest, with U.S.-market sales continuing into 2004. Here's an example of a very late Tracker, found in a North Carolina car graveyard recently. The 1989-1997 first-generation Trackers were based on the Suzuki Sidekick, while the 1998-2004 Trackers had the Suzuki Vitaras (not to be confused with the much grander Grand Vitaras) as their siblings. Production of these trucks for the South American market (as the Chevrolet Vitara) continued in Ecuador all the way through 2014. The Tracker name has also gone onto some versions of the Chevrolet Trax around the world. This one is a base four-door hard top/rear-wheel-drive model, which had an MSRP of $17,330. That's about $29,789 in 2024 dollars. You'll find one in every car. You'll see. The engine is a Suzuki 2.0-liter straight-four rated at 127 horsepower and 134 pound-feet. A five-speed manual was base equipment, but very few American vehicle shoppers wanted three pedals by the middle 2000s. This truck has the Aisin four-speed automatic. We like it loud. It appears that someone associated with this truck graduated from Julius L. Chambers High School last year. In the United States, the Tracker was replaced by the Saturn Vue. If Tracker can handle (unspecified Middle Eastern country), it can survive the jungle back home. Siempre contigo.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

2014 Chevrolet Silverado and GMC Sierra debut all-new designs, three new engines

General Motors has finally dropped the curtain on the 2014 Chevrolet Silverado and 2014 GMC Sierra. Both trucks have undergone substantial revisions with updated versions of the company's 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 engines. In a shot across the bows of both Ford and Chrysler, GM says it won't use a V6 engine adapted from passenger car applications. Instead, it developed the 4.3-liter engine based on its proven truck-duty architecture.
All three mills will boast direct injection fuel systems as well as a new cylinder head design. Combined with a revised piston, the new engines feature a smaller combustion chamber with a compression ratio of 11:1 or higher depending on the application. Cylinder deactivation and continuously variable valve timing are all part of the recipe, and each engine is paired with a six-speed automatic transmission with auto grade breaking. So far, no fuel economy or horsepower figures have been released, though GM says the new engines will best their predecessors in both areas.
Outside, the trucks feature a number of enhancements to reduce drag and wind noise, and GM claims both the Silverado and Sierra will offer buyers some of the quietest cabins in the class. Extended cab models now feature front-hinged rear doors to allow easier access to the back passenger area, and Crew Cab buyers can now select between a five-foot, eight-inch bed or a six-foot, six-inch bed. Buyers with a mind toward going off road will also rejoice in the return of the Z71 package, complete with Rancho shocks, front tow hooks and additional under-body protection.