2011 Camaro Ss, Imperial Blue W/ White Rally Stripes on 2040-cars

Auto blog

Weekly Recap: Racing legend Jim Hall explains Chevy's futuristic Chaparral concept

"I said our cars are built to be winners." – Jim Hall Racing legend Jim Hall never thought he'd be a video game consultant, but when Chevrolet asked for his advice to create a futuristic Chaparral for the Vision Gran Turismo series, he was eager to help. He reviewed early sketches and suggested some changes that made it onto the concept, including the addition of a camera that's mounted onto a mast over the cabin to aid the driver. The Chevy Chaparral 2X Vision Gran Turismo concept was revealed this week at the Los Angeles Auto Show and will be part of a downloadable update for PlayStation 3's Gran Turismo 6 in December. Theoretically, at least, it uses a laser-beam propulsion system and an air-powered generator to produce 900 horsepower in the video game. It's capable of sprinting to 60 miles per hour in 1.5 seconds en route to a top speed of 240 mph. Those gaudy performance specs – even in the virtual world – came at Hall's urging. "I said our cars are built to be winners," Hall told Autoblog on the floor of the Los Angeles show. The 79-year-old drove Lotus racecars in Formula One before launching the successful Chaparral Cars in the 1960s. Like his innovative Can-Am racers, the Vision Gran Turismo project has an eye toward the future. It also introduces the iconic Chaparral name to a new generation of fans, and hopefully, Hall says, gets them excited about engineering and design. "It emulates what we did in the '60s," he said. And what they did back then still resonates. Chaparral Racing and Chevy partnered more than 45 years ago for development work on the composite monocoque chassis, lightweight alloy powertrains, automatic gearboxes and active aerodynamics. "He [Hall] walked right back into this and was able to apply thinkings and learnings," said Clay Dean, General Motors executive director of advanced design. The Chevy Chaparral 2X Vision Gran Turismo concept was created at GM's North Hollywood advanced design studio, and it will be on display at the show through November. Other News and Views Sebastian Vettel joins Ferrari team in 2015 Ferrari confirmed that four-time Formula One World Champion Sebastian Vettel will join the Scuderia for the 2015 season, jettisoning Ferrari's current ace, two-time champ Fernando Alonso. Vettel has been F1's most successful driver since Michael Schumacher, though he's struggled to match his previous accomplishments in 2014.

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.