1981 Camaro Z28 No Reserve! on 2040-cars
Holmdel, New Jersey, United States
Engine:5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Body Type:Coupe
Vehicle Title:Clear
Exterior Color: Burgundy
Make: Chevrolet
Interior Color: Tan
Model: Camaro
Number of Cylinders: 8
Trim: Z28 Coupe 2-Door
Drive Type: RWD
Mileage: 225,000
Warranty: Vehicle does NOT have an existing warranty
Clean car fax only 2 owners in 32 years! This is a 1981 Camaro Z28 that does run and drive, though it needs a jump and I would give it a good going over before putting it back on the road since its been sitting a few years. Its the real deal! NOT A CLONE!! You wont find an unrestored Z28 with as little rust as this one. It was stored indoors the last 30 years. It was painted many years ago and needs to be repainted. As far as the rust, there's a small rust hole in the rt rear qtr, there's some rust by the battary tray, and some under the hood and by the trunk lid. The rest of the panels are in great shape, the fenders, doors, rockers, and frame rails are all straight and solid. The interior carpets are very dirty but not ripped, the seats have one rip on the driver seat. The fuel tank is also good. Even the tires and exhaust system are in great shape! This can be a nice driver with a little TLC, a good cleaning and a Maaco paint job, or you wont find a better candidate for a total restoration. Again this is a REAL Z28 with all the spoilers, fender vents, funtional hood scoop, and wheel flairs still in place. It sold here on EBay for $3900 and the buyer backed out immmediatly after the auction then it happened again the next time I listed it so please dont bid if your not going to follow through.
My starting bid is now over $900 less than what it sold for last week. You just dont find 2nd gen Z28s that are solid, run, and drive for less than $4000 anymore.
Chevrolet Camaro for Sale
Auto Services in New Jersey
Venango Auto Service ★★★★★
Twins Auto Repair Ii ★★★★★
Transmission Surgery & Auto Repair LLC ★★★★★
Tg Auto (Dba) Tj Auto ★★★★★
Szabo Signs ★★★★★
Stuttgart German Car Service ★★★★★
Auto blog
Want a V8 on the cheap? Buy a work truck
Thu, Aug 3 2017In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.
Mark Reuss: GM can't afford product 'misses,' has 'thought about' CT6 V-Series
Thu, Apr 9 2015Mark Reuss is a busy man. He oversees General Motors' global product portfolio, an all-encompassing task for a company that sold more than 9.9 million cars and trucks last year. When GM launches a well-received product, like the road-going rocket ship that is the Chevrolet Corvette Z06 – he gets credit. When the company stumbles with the slow-selling Chevy Malibu or grapples with fallout from the decade-old Saturn Ion and its flawed ignition switch, he gets blamed. GM owners, the press and sometimes the federal government, demand answers. Bob Lutz famously held the job before Reuss. So did Mary Barra, who's now GM's chief executive. There's a New GM, but the lineage is connected to a long history. When he's not thinking product, Reuss, an executive vice president, also runs the purchasing and supply chain for the company, which is still one of the largest industrial empires in the world. We caught up with Reuss on the floor of the New York Auto Show, where GM had just rolled out two crucial new products: the 2016 Cadillac CT6 and the 2016 Chevrolet Malibu. Speaking with a small group of reporters, Reuss delved into a variety of subjects, including the new Malibu, Cadillac's future (he thinks the ATS-V is going to "flame the M3 and M4"), and other topics. On fixing the Malibu: "We can't miss. We can't have those kinds of misses [like the previous generation] on our cars and crossovers and trucks. We can't do that. If we do that, we give a reason for someone to go buy something else. It's that simple. "On a car like the Malibu we have a chance to really fix all of that, which we have, and then lead. Then you've got a real opportunity there. So that's what we've really been focused on here – to fix those things." He later added: "We need that car here to transform Chevrolet desperately because it's the heart of the market. And when you think of Chevrolet, people will come back and think about what we did with the [new] Malibu and the Cruze... It's hugely important to us." On Cadillac: "If we go out and try and out-German the Germans, it's probably not going to work. We've got an opportunity here generationally where there's a lot of people younger than me that have parents that drove BMWs and Mercedes, and I think there's an opportunity there for those people to drive something different than what their parents did, and I think that's always been an opportunity in the auto industry if you look at the history of it.
Amelia Island 2013: Chevrolet Corvette Sting Ray from concepts to split windows
Wed, 13 Mar 2013While this year marks 60 years of the Chevrolet Corvette, the 2013 Amelia Island Concours d'Elegance focused on one of the coupe's most sought after models, the 1963 Sting Ray. General Motors design boss Ed Welburn was on hand to show off the all-new C7 Corvette, but even the hard-edged styling of the 2014 Stingray couldn't take away from the beautiful 1963 models sitting out on the field.
In addition to the original Sting Ray and the 1959 Sting Ray Concept, some of the other classic 'Vettes included "Big Tank" racecars, an interesting cutaway coupe, a right-hand-drive Z06 and the attention-grabbing 1963 Corvette Rondine by Pininfarina. Another impressive Corvette was the 1964 Corvette XP-819 rear-engine prototype. Owner Mike Yager had the car finished as a driving chassis for this year's show, but promises the car will be back to its original glory in time for next year's event.