1969 Rs Z/28 Camaro on 2040-cars

Auto blog

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Junkyard Gem: 1988 Chevrolet Spectrum Sport Coupe

Before General Motors created the Geo brand for cars built or designed by its overseas partners, the Chevrolet Division put its badges on U.S.-market versions of the Toyota Corolla Sprinter, the Suzuki Cultus and the Isuzu Gemini. Those cars were known as the Nova, the Sprint and the Spectrum, and all became Geos starting with the 1989 model year. Today's Junkyard Gem is one of the last Chevy Spectrums ever sold, found in a Denver self-service yard a few months ago. Midway through 1988, the Chevrolet Spectrum abruptly became the Geo Spectrum and was assigned to the 1989 model year. This car was built in May 1988, making it one of the very last of the pre-Geo Spectrums. The Chevrolet/Geo Spectrum was available as a four-door sedan and as a three-door hatchback, from the 1985 through 1989 model years. For 1988 only, a Spectrum Sport Coupe package, featuring some trim upgrades and these rad decals, could be had on the hatchback. This car was essentially identical to its Isuzu-badged counterpart, the I-Mark. In 1988, the MSRP for the cheapest possible Chevy Spectrum hatchback (the stripped-down Spectrum Express) was $6,495, while its somewhat better-equipped I-Mark twin started at $7,439 (that's $17,128 and $19,617 in 2023 dollars). Meanwhile, the base Hyundai Excel hatchback listed at $5,295 and the Yugo GV cost a hilarious $4,199 ($13,963 and $10,941 in today's money). Power came from this 1.5-liter SOHC four-cylinder, rated at 70 horsepower. A turbocharged version with 110 horsepower was available as well. You could get an automatic transmission in the Spectrum, but this car has the base five-speed manual. This car didn't get the optional air conditioning, but at least it has the traditional Isuzu HVAC control icons featuring blow-dried hair and high-heeled dominatrix boots. Just over 170,000 miles on the odometer. Someone installed a pretty good (for the 1980s) Blaupunkt Charlotte CR148 cassette deck in the dash. This was a necessity if you wanted to enjoy full appreciation of the music of the era. The Spectrum is special! It's as slick as city rain. "I didn't spend a lot of money but with my Spectrum it looks like I did." Joe Isuzu mocked Toyota salesmen when pitching the I-Mark. As was nearly always the case during the 1980s, the JDM ads for the same car were much more fun. They should have recreated this commercial with Spectrums.