1967 Chevrolet Camaro Rs Convertible (tripple Black) on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

GM will make Chevy Volt production announcement tomorrow

Thing are apparently happening to get the next-generation Chevy Volt ready for public consumption. The most obvious proof is in a preview of an announcement (possibly coming tomorrow) that the two main places where General Motors gets the Volt ready -the Detroit-Hamtramck Assembly Plant and the Brownstown Township battery assembly facility - will be getting big money upgrades and lots of new positions. The Hamtramck plant builds the Volt and its fancier cousin, the Cadillac ELR, as well as the global versions of the Volt. The Detroit News reports that GM will add 1,400 jobs and spend roughly $450 million at the two locations in order to build the redesigned Volt. What's less clear is exactly what the updates will bring us. We've heard that the new volt will be a 2016 model and come on a new chassis. Speculation in The Detroit News about tomorrow's announcement runs the gamut from a new compact PHEV with less electric range and a lower price (which makes sense) to an updated Volt with more electric range (heard it before) to a new all-electric vehicle (the moon shot). If there's any hints to be gleaned in the international Volts, there are also reports coming in that the Opel brand will get an all-electric vehicle that is cheaper than the Ampera. Read into that what you will. We pestered GM's Kevin Kelly on the new Volt (again) and he said (again) that he couldn't give out any more detail other than what's been reported. He just told AutoblogGreen that there will be an announcement tomorrow and that it will be about the Hamtramck and Brownstown facilities and involve the Volt. So, stay tuned.

Chevy's low-cost pedestrian avoidance to debut on 2016 Malibu

The mainstreaming of safety technologies that began on luxury vehicles will get a big boost from General Motors later this year. The General says it plans to offer 22 driver assistance systems across its product portfolio of 2016 models, starting with the redesigned Chevrolet Malibu - the one that we know will keep tabs on teenagers for the benefit of parents. Pedestrian avoidance will be another of its available options. Instead of kitting the sedan out with numerous and expensive radar arrays, the GM system uses the camera mounted next to the rearview mirror that is already used for the lane-keeping function. New software lets it detect pedestrians, and when it detects a potential collision with one, it can alert the driver and brake autonomously if the driver doesn't react. Eventually, engineers want to give it the ability to do the same with cyclists. Because it uses existing hardware updated with new code, GM says the application costs "a few hundred dollars." GM demonstrated the Front Pedestrian Braking preventing a crash with a dummy pedestrian at speeds up to 15 miles per hour. Automotive News reports that it will reduce the severity of impact up to 40 miles per hour, but "may not be of much use in collisions at higher speeds." That feature will also join the options list of the Cadillac CT6. The press release below has more on GM's driver tech soon on the way. Related Video: GM Paving Way to Smarter and Safer Driving at All-New Active Safety Test Area 22 crash-avoidance technologies offered on 2016 Chevrolet, Buick, GMC and Cadillac models MILFORD, Mich. 2015-07-24 – Chevrolet, Buick, GMC and Cadillac will offer 22 different active safety technologies across their 2016 model year U.S. lineups, ranging from driver alerts to those that automatically intervene and assist the driver in critical situations. Safety engineers will develop and test these and other safety technologies for products around the world at GM's new, 52-acre Active Safety Test Area at its Milford Proving Ground near Detroit. The $14 million facility officially opened Friday. "Our comprehensive safety strategy of helping customers before, during and after a crash continues," said Jeff Boyer, vice president of GM Global Vehicle Safety.