**factory A/c**runs**great Project Car** on 2040-cars

Auto blog

Chevy Volt replacement battery cost varies wildly, up to $34,000

There's a growing hubbub in the plug-in vehicle community over what looks like some ridiculously cheap replacement batteries for the Chevrolet Volt going up for sale. GM Parts Online, for example, is selling a replacement Volt battery with an MSRP of $2,994.64 but, with an online discount, the price comes down to $2,305.88. For the 16-kWh pack in the 2012 Volt, that comes to a very low $144.11 per kilowatt hour (kWH). But is it a real deal? How can it be, when a Chevy dealer may quote you a price of up to $34,000 to replace the pack? For a 16-kWh Volt pack, $2,305.88 comes to a very low $144.11 per kWh. But is it a real deal? Battery packs in alternative propulsion vehicles are usually priced by the kWh and, historically, they've been thought to be in the range of $500-per-kWh for OEM offerings. Since automakers are understandably secretive about their costs, we still don't know what the real number is today, but we do know it varies by automaker. Tesla, for example, has said it pays less than $200-per-kWH at the cell level but, of course, a constructed pack would be more. Whatever is going on, li-ion battery prices are trending downward. So, $144.11 certainly sounds great, but what's the story here? Kevin Kelly, manager of electrification technology communications for General Motors, reminded AutoblogGreen that GM Parts Online is not the official GM parts website and that, "the costs indicated on the site are not what we would charge our dealers or owners for a replacement battery. There would be no cost to the Volt owner if their battery needs replacement or repair while the battery is under the eight year/100,000 mile limited warranty coverage provided by Chevrolet." A single price tag also can't be accurate for everyone, Kelly said. "If the customer needs to have their battery repaired beyond the warranty, the cost to them would vary depending on what needs to be replaced or repaired (i.e. number of modules, which specific internal components need replacement, etc.)." he said. "So, it's hard for us to tell you exactly what the cost would be to the customer because it varies depending on what might need to be repaired/replaced. As a result, the core charge would vary." But, is the $2,300 price even accurate for anyone? Thanks to a reader comment, we see that this similar item on New GM Parts makes it look like the lithium-ion modules that Kelly mentioned – where a lot of the expensive bits are – are not included.

NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV

The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video:

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.