2001 Chevy 3500hd 15k Gvw Dual Rear Wheels Flatbed Southern Truck Low Miles!!! on 2040-cars
Canandaigua, New York, United States
Body Type:flatbed
Engine:8.1L
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Dealer
Year: 2001
Make: Chevrolet
Model: C/K Pickup 3500
Cab Type (For Trucks Only): single
Trim: base
Warranty: Vehicle does NOT have an existing warranty
Drive Type: rear
Safety Features: Anti-Lock Brakes
Mileage: 66,530
Exterior Color: White
Interior Color: grey
Disability Equipped: No
Number of Cylinders: 8
You are viewing a 2001Chevy 3500HD 15K GVW Dual Rear Wheels 9' Flatbed Southern Truck with no rust Only has 66K ORIGINAL MILES! 8.1L V8 gas engine automatic transmission, this is the HD model which has 19.5" tires and 15,000lb GVW. Cab to Axle measurement is 61" The truck is in great shape for its age. Truck portion has no rust or dents (was originally green, previous owner painted it white to match their fleet.) This truck was Owned by a landscaping company and was part of a large fleet and never run in the winter. The interior is in great shape as well. This truck has just been through our shop and we have just replaced front and rear brakes, tune up and oil change have been done as well. The engine has a lot of power and runs excellent, the transmission shifts like it should. This truck is mechanically sound. The tires are decent with about half tred left on them. This truck is ready to go to work today. Call (585)393-6400 with any questions.
|
Chevrolet C/K Pickup 3500 for Sale
Chevrolet silverado 3500 4wd reading utility box free autocheck no reserve
1987 chevrolet chevy dually r30con r30 454 ci engine automatic transmission 2wd
1983 chevrolet 1 ton truck flat bed work truck
1995 chevy 3500 stake body manual(US $5,250.00)
1989 chevrolet k3500 silverado 4x4 standard cab pickup 2-door 7.4l
2005 chevy dually
Auto Services in New York
Westchester Toyota ★★★★★
Vision Dodge Chrysler Jeep ★★★★★
Village Automotive Center ★★★★★
TNT Automotive ★★★★★
Sterling Autobody Centers ★★★★★
Sencore Enterprises ★★★★★
Auto blog
Chevy Colorado, GMC Canyon get updated tachometers due to graphical error
Sun, Feb 8 2015After James Bearing bought a Chevrolet Colorado, he noticed a discrepancy between the truck's spec sheet and the truck's tachometer: Chevrolet said 3.6-liter V6 in the little pickup produces 305 horsepower at 6,800 rpm, but the the tachometer indicates a redline at 6,500 rpm. So either he wasn't making as much power as he was promised, or the tachometer display was incorrect. Bearing said he asked Chevy about it but got no response. Until now. A General Motors spokesman said the rev limiter is indeed set for 6,800 rpm, but the tach graphics "are slightly off" in the Colorado and the GMC Canyon, and submitted an SAE horsepower certification to back him up. If you're wondering how such a thing got past quality control... well, let's just say you're not alone. GM is going to fix "the graphics on future trucks," which makes it sound like Bearing will just have to learn to live with the indicated redline he's got. He could always pretend he's driving a sleeper, with four more ponies waiting to be unlocked in the danger zone for those who dare. Related Video: Featured Gallery 2015 Chevrolet Colorado: First Drive View 38 Photos Related Gallery 2015 GMC Canyon: Quick Spin View 27 Photos News Source: Auto Guide Auto News Chevrolet GM GMC Truck gmc canyon
China's rise, global restructuring wither GM's Korea division
Wed, Jan 7 2015An article in the Daily Kanban suggests the sun is setting on GM Korea, and it could already be well into dusk. GM Korea came about when General Motors, along with co-investors SAIC and Suzuki, bought Daewoo Motors from parent company Daewoo Group in 2001; it had a previous tie-up with GM, a joint venture that ended in 1992, although Daewoo cars were based on GM cars until 1996. Over the decade following the purchase, it became such an important part of operations that it was renamed GM Korea in 2011, "to reflect its heightened status in [the] global operations of GM." Just two years later, the printed rumors were that the subsidiary responsible for a fifth of Chevrolet's global production could be shutting down. The division's sales were down almost 21 percent through November of last year, counting domestic South Korean sales, exports, and CKD – Complete Knock Down – products. That makes the labor strife, already an issue for four years, even more acute, reports say the subsidiary will lose $36 million a year if it can't get the job and wage cuts it wants, and government concessions can't make up for the losses. And it gets worse, so head over to Daily Kanban to read the rest of the story.
A conversation with GM's Mark Reuss on MPG, aluminum and Corvettes
Wed, Feb 19 2014There was plenty to talk about when General Motors hosted its annual mid-December holiday media reception a few months ago. GM had just decided to pull its global Chevrolet brand out of major European markets, where Chevys have competed directly with GM Europe Opel and Vauxhall vehicles, and the US government had sold its last remaining shares of GM stock. But most important was the company's just-reshuffled leadership. Post-bankruptcy CEO Dan Akerson had announced that he would step aside and that 52-year-old Mary Barra would replace him on January 15. Not only would she be the first woman to lead a major automaker, she would also be GM's first engineer CEO since Bob Stempel in the early 1990s. "I look at 2013 and 2014, as the retooling of General Motors" - Mark Reuss Replacing her as executive VP for global product development (and purchasing and supply chain) would be 49-year-old Mark Reuss, who had served a stellar four years as North American president, and elevated to corporate president (from executive VP and CFO) would be 42-year-old Dan Amman. All three are relatively young auto enthusiasts who are liked and respected inside and outside the company, and their collective talents and experience are highly complementary. I've interviewed Barra and found her smart, personable and knowledgeable, though she carefully walks the corporate line in speaking and answering questions. I met and chatted with Ammann for the first time at that holiday reception, and he made a good first impression. But I've known Reuss for some time as a genuinely good guy and a highly capable and inspiring leader, and I believe he is exactly the right person for the global product responsibility once famously held by the outspoken, oft-controversial Bob Lutz. So I jumped at an opportunity to join a group interview of Reuss (with mostly business reporters) at the Detroit Auto Show in January. It was an interesting session of mostly good questions, which he answered with refreshing candor and humor. "I look at 2013 and 2014, as the retooling of General Motors," Reuss said. "We've taken down almost every plant in North America, converted and turned it this last year, and to do that with award-winning vehicles and pretty flawless launches is key. We have to keep the train rolling on great product, because the rest won't happen without the best product, period." A reporter asked whether GM was pushing big trucks, SUVs and Corvettes again because gas is cheap. "No," Reuss said.
2040Cars.com © 2012-2025. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.057 s, 7882 u