94 Silverado And 14 Ft Jon Boat on 2040-cars

Auto blog

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

GM recalling 521,817 cars in two campaigns

General Motors is issuing two, separate recalls covering a total of 521,817 vehicles worldwide. The larger campaign covers 468,887 units of the 2011-2012 Chevrolet Malibu. Specifically, 437,045 of these are in the US, and the rest are outside the country. In these sedans, a steel cable that connects the seat belt to the vehicle can fatigue and separate. GM knows of 36 claims about the problem but only one minor injury. According to The Detroit News, this happened when a taxi driver hit his head. To fix things, dealers will replace the "outboard lap mounting bracket," which will move the tensioner rearward. They'll also inspect and if necessary replace the steel cable and lap pretensioner. In the second campaign, 52,930 examples the 2015 Chevy Colorado and 2015 GMC Canyon have seat frame attachment hooks that were installed incorrectly during assembly. GM hasn't received any reports of crashes, injuries, or fatalities about this problem. Dealers will inspect the affected trucks and repair as necessary. GM spokesperson Alan Adler told Autoblog that he didn't yet have a specific date when affected owners would receive official mailings about either of these recalls. GM Statement General Motors is recalling 48,309 2015 model year Chevrolet Colorado and GMC Canyon midsize pickup trucks in the U.S. because certain seat frame attachment hooks were not properly attached to the vehicle body during assembly. Dealers will inspect the potentially affected seats for proper installation and repair if necessary. GM knows of no crashes, injuries or fatalities related to this condition. The total vehicle population of the recall is 52,930 including 4,620 vehicles sold in Canada. General Motors is recalling 437,045, 2011-2012 model year Chevrolet Malibus in the U.S. because the flexible steel cable that connects the safety belt to the vehicle can fatigue and separate over time as a result of occupant movement in the seat. Dealers will replace the outboard lap mounting bracket to relocate the tensioner slightly rearward. Dealers will inspect the cable and, if necessary, replace the lap pretensioner. GM knows of 36 claims, no crashes or fatalities and one minor injury reportedly related to the condition. The total vehicle population of the recall is 468,887 including Canada, Mexico and exports.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: