Find or Sell Used Cars, Trucks, and SUVs in USA

1976 Chevy Step Side 4wd Pu on 2040-cars

US $29,500.00
Year:1976 Mileage:3020 Color: hardware
Location:

White Pine, Tennessee, United States

White Pine, Tennessee, United States
Advertising:

1976 Chevy 4WD Stepside P/UP

Color: Victory Red Interior: Red

Mileage 3020

Complete off frame restoration; Frame totally sandblasted and painted w/zinc chromate, 2nd coat w/black 'Emron' paint. Body,rear axle, transfer case and trans. have matching numbers.

Suspension:

New front dual "Heckelthorn" front shocks and strg.dampner. Rear aux. springs, frt. stabilizer bar, frt.and rr springs W/new Urethane Bushings. All new body and rad. hold down cushions, new eng. and trans.mounts.

Power Train:

New 350 GM 'Crate' engine (2900 miles), new alternator, starter, spark plugs and wires, radiator, a/c condensor, a/c dehydrator bottle, clutch fan, all hoses,drive belts, prop. shaft universal bearings,harmonic balancer pully, a/c compressor w/3yr. mfg. warranty, a/c evaporator core, htr. core, and pwr. strg. pump. New frt. wheel bearings and 4wd lock out hubs cleaned and repacked. Original transfer case and trans.took down and resealed.New clutch, pressure plate and throw-out bearing. Positraction axle. Factory dual exhausts w/new heat risers. Original 4 bbl quadra jet carb. and distributor original- carb. rebuilt.

New wt/ltr Bridgestone tires(32X11.50R 15LT)and rally wheels.

Sheetmetal:

New frt. and rr. fndrs,bumpers, box, hood, doors and grill w/trim. New hood springs, brackets and hood pad insulator.

Body:

Cab is original,new door hinges,body door locks, all new glass, new doors w/all new dr. interior wd/regulators and exterior hardware, new elect. GM rear sliding glass, new stl.steel o/s r/v mirrows, all new interior W/new

Am-Fm c. radio. New inst. cluster gages and instr pnl pad. Tilt strg.,new seat belts, new carpet,new heater mtr fan and new wshr/wiper motor.

Box:

New kiln dried oak boarding,w/seasoned linseed oil, w/polished stl. steel trim and fastners. New tail lites, cargo lamp and halogen headlamps.

Note:

All sheetmetal parts, cab, fndrs., doors, box and hood were 1st painted separate then assembled. Just like factory.

$40,000 Plus invested.

865-674-2624 865-712-4122

Auto Services in Tennessee

Tri County Tires ★★★★★

Auto Repair & Service, Tire Dealers, Wheels-Aligning & Balancing
Address: 909 E Tri County Blvd, Oak-Ridge
Phone: (865) 435-7259

Travis Auto Repair ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 4603 Sulphur Springs Rd, Smyrna
Phone: (615) 410-7168

Tindell G T Tire ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 2902 Andersonville Hwy, Andersonville
Phone: (865) 494-0361

Taylor`s Paint & Body ★★★★★

Automobile Body Repairing & Painting
Address: 176 Park St, College-Dale
Phone: (706) 858-0907

Stanley`s ★★★★★

Auto Repair & Service, Tire Dealers
Address: 2610 N Roan St, Mountain-Home
Phone: (423) 282-6711

Sport 4 Automotive Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Body Parts
Address: 120 Honey Bear Campground Rd, Trade
Phone: (828) 963-9507

Auto blog

Huge, pricey trucks haul jobs and profits for the Detroit Three

Tue, Feb 5 2019

DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.

7 major automakers to build open EV charging network

Wed, Jul 26 2023

A new joint venture established by BMW, GM, Honda, Hyundai, Kia, Mercedes-Benz and Stellantis will build a new North American electric vehicle charging network on a scale designed to compete with Tesla's industry-benchmark Supercharger network. The 30,000-plus planned new chargers will accommodate both Tesla's almost-standard North American Charging System (NACS) and existing automakers' Combined Charging System (CCS) options, effectively guaranteeing compatibility with the vast majority of current and upcoming electric models — whether they're from one of the involved automakers or not.  "With the generational investments in public charging being implemented on the Federal and State level, the joint venture will leverage public and private funds to accelerate the installation of high-powered charging for customers. The new charging stations will be accessible to all battery-powered electric vehicles from any automaker using Combined Charging System (CCS) or North American Charging Standard (NACS) and are expected to meet or exceed the spirit and requirements of the U.S. National Electric Vehicle Infrastructure (NEVI) program." Critically, the automakers involved will have a say in how the charging tech is implemented, guaranteeing that the hardware will play nicely with each automaker's in-house charging systems. Hyundai and Kia, for example, were hesitant to jump on board the Tesla NACS bandwagon earlier this year over concerns that the Supercharger network is insufficient for powering the two automakers' 800-volt charging systems; similar tech is used by Volkswagen and Porsche.  In addition to providing much-needed capacity and high-output charging for America's growing fleet of electric cars and trucks, the new network will integrate seamlessly with each automaker's in-app and in-vehicle features, rather than forcing customers to use third-party tools and payment systems, as is the case with some existing public charging infrastructure.  "The functions and services of the network will allow for seamless integration with participating automakersÂ’ in-vehicle and in-app experiences, including reservations, intelligent route planning and navigation, payment applications, transparent energy management and more. In addition, the network will leverage Plug & Charge technology to further enhance the customer experience," the announcement said.

Amelia Island 2013: Chevrolet Corvette Sting Ray from concepts to split windows

Wed, 13 Mar 2013

While this year marks 60 years of the Chevrolet Corvette, the 2013 Amelia Island Concours d'Elegance focused on one of the coupe's most sought after models, the 1963 Sting Ray. General Motors design boss Ed Welburn was on hand to show off the all-new C7 Corvette, but even the hard-edged styling of the 2014 Stingray couldn't take away from the beautiful 1963 models sitting out on the field.
In addition to the original Sting Ray and the 1959 Sting Ray Concept, some of the other classic 'Vettes included "Big Tank" racecars, an interesting cutaway coupe, a right-hand-drive Z06 and the attention-grabbing 1963 Corvette Rondine by Pininfarina. Another impressive Corvette was the 1964 Corvette XP-819 rear-engine prototype. Owner Mike Yager had the car finished as a driving chassis for this year's show, but promises the car will be back to its original glory in time for next year's event.