Solid Southern Short Bed Swb Disc Brakes, 12 Bolt, Air Conditioning Lowered on 2040-cars
Tulsa, Oklahoma, United States
Body Type:Pickup Truck
Engine:V8
Vehicle Title:Clear
Mileage: 999,999
Make: Chevrolet
Number of Cylinders: 8
Model: C-10
Trim: C10
Drive Type: 2 wd
Warranty: Vehicle does NOT have an existing warranty
This is a local 1970 C10 shortbed truck that is super solid and ready for your personal touch, but let me represent this truck accurately and first tell you that the paint is not as nice as it looks in the pictures, I'll explain more in a bit. The truck is incredibly solid, I can tell that the inside rocker panel on the passenger side has been replaced so even the little bit of rust the truck had is now gone. The truck has a lot going for it and a lot of money has been spent on it, the gas tank has been relocated to the bed of the truck to avoid the dangers of a fuel tank under you butt! The air conditioning is complete and was working last summer but now needs a charge, new inner fenders, new steel hood, rebuilt small block motor and automatic transmission, disc break conversion, lowered, upgraded wheels and shaved taillights. It was basically restored in a garage by an amateur and some things could be better and there are a few things that could be finished up yet like the cardboard liner in the glovebox, the door jambs are unfinished and there's no radio or speakers. The paint looks ok from twenty or thirty feet away, (I would definitely repaint it as it looks dry and it not very straight), the tires are older and should be replaced, the bodywork is amateur and cracking in a few places, (see pictures), overall the truck is well on its way but a little tacky. If you're looking for an expensive frame off restoration this definitely not your truck, (nor your price range), if you're looking for something that has a rock solid foundation and you can tinker with along the way and at a reasonable price then I would encourage you to come and look as it just might be exactly what you're looking for! I have a clear open title in hand in my name and ready to transfer to the winning buyer, $500 deposit due in 36 hours of auction ending and balance due in 7 days or upon pick up whichever comes first, sold as is where is no warranties of any kind.
Chevrolet C-10 for Sale
- 1967 chevy c-10 custom pickup truck 68 69 70 71 72 must see rust free
- 1966 chevrolet 1/2 ton truck / short bed stepside / swb project(US $2,250.00)
- 1967 chevrolet c-10 frame off restoration hot rod no reserve f-1 50 slammed!!(US $34,900.00)
- Nice 1970 c-10, 350 engine, 4 speed stick, power brakes, power steering(US $7,800.00)
- 1974 one owner chevrolet c-10 lwb
- 1969 chevy truck prostreet or raceing truck
Auto Services in Oklahoma
World Auto Connection ★★★★★
Walker`s Auto Repair & Towing ★★★★★
W G Auto Collections ★★★★★
Sooner Muffler ★★★★★
Simplified Repair Services ★★★★★
Pro-Tech Muffler ★★★★★
Auto blog
Buick Velite is a not-so-Volt-like plug-in hybrid concept for China
Mon, Nov 7 2016Is the Buick Velite a Volt by any other name? That's a question worth asking after General Motors said that the Buick Velite concept vehicle will make its global debut at the Guangzhou Auto Show later this month. GM says the car "will provide a template for upcoming models being launched under the Buick Blue new energy vehicle strategy." Whether that means the Velite is a variant of the second-generation of the Chevrolet Volt extended-range plug-in is open to interpretation. Some automotive publications, including Autoweek, are saying that's the case, but GM China doesn't mention the Volt in its press release, only saying that the car is a "high-performance" plug-in hybrid vehicle. As we know, GM doesn't use the "PHEV" descriptor for the Volt, which makes us thing the Velite's powertrain is more like the Cadillac CT6 PHEV. Either way, the concept was developed by the Pan Asia Technical Automotive Center (PATAC), which is a joint venture between GM and Shanghai-based SAIC. As far as the name, GM has been shopping the Velite moniker around for a while now. The automaker first used Buick Velite for the convertible concept vehicle it showed off at the 2004 New York Auto Show. More recently, GM in 2014 filed to use the name for the US variant of its Opel Cascada four-seat convertible model, which debuted in 2013. As for the second-generation version of the Volt, that model appears to be gaining favor in the US. Domestic sales of the Volt through October have surged 64 percent from a year earlier to more than 18,500 units. The new version boosted its all-electric range by 40 percent to 53 miles while increasing its power output by 20 percent. Related Video: News Source: General Motors via Autoweek, Automotive News-sub.req. Green Buick Chevrolet Electric Hybrid PHEV buick velite
The Jitterbugs somersaulted at the 1986 Chicago Auto Show for the Chevy Nova
Tue, Dec 30 2014Judging by the vintage videos that the Chicago Auto Show has been uploading, if you wanted to check out the latest vehicles and watch some dancers in the same place in the late '80s and early '90s, then the Windy City event was definitely the place to be. We've already seen the Footlockers pitching the Cavalier in '88 and a troupe of women singing about the Geo brand in '91. Apparently, the trend went back even further, though. Just take a look at this group called the Jitterbugs selling some badge-engineered products from Chevrolet at the 1986 show. Flanked by the Chevy Nova and Spectrum, these guys managed to do a few pretty impressive jumps and somersaults but mixed them with some rather uninspired spins, as well. Also, wait for 1:24 into the clip to see the least enthusiastic backup dancers that the world has ever known. The Jitterbugs are even further proof that Chevy's habit of mixing dancing and its vehicles goes back even further than the Volt. News Source: ChicagoAutoShow via YouTube Auto News Marketing/Advertising Chicago Auto Show Chevrolet Videos Chicago chevy nova
GM profit dips on truck changeover, but beats estimates
Thu, Apr 26 2018DETROIT — General Motors on Thursday reported a higher-than-expected quarterly profit despite a drop in production of high-margin pickup trucks, as it gears up for new models that are expected to boost profits next year. Like rivals Ford and Fiat Chrysler Automobiles, GM is banking on highly-profitable Chevy Silverado and GMC Sierra pickup trucks to lift profits, as consumers shift away from traditional passenger cars in favor of these larger, more comfortable trucks, SUVs and crossovers. During the first quarter, the process of changing over to GM's new pickups resulted in a drop in production of 47,000 units. GM Chief Financial Officer Chuck Stevens said the production drop had resulted in a drop in pre-tax profit of up to $800 million. Earlier this year, GM said its 2018 profits would be flat compared with 2017, but expected its all-new pickup trucks would boost margins starting in 2019. On Thursday, GM reiterated its full-year 2018 forecast for adjusted earnings in a range from $6.30 to $6.60 per share. The automaker said capital expenditures were more than $500 million higher in the quarter because of investments its new pickup trucks and a family of low-cost vehicles under development with Chinese partner SAIC Motor Corp. On Wednesday, rival Ford said it would stop investing in most traditional passenger sedans in North America. CFO Stevens told reporters on Thursday that GM has "already indicated that we will make significantly lower investments on a go-forward basis" in sedans. 2019 GMC Sierra View 21 Photos GM benefited from a lower effective tax rate in the quarter, but adjusted pre-tax margin fell to 7.2 percent from 9.5 percent a year earlier. Stevens said the company's profit margin should hit 10 percent or higher in the second quarter and for the full year. GM said material costs were $700 million higher in the first quarter, and it expects those costs to continue rising. The automaker said it would counter those increases with cost cutting measures. "It is a more difficult environment than it was three or four months ago," Stevens said when asked about rising commodity prices from potential steel and aluminum tariffs announced by the Trump administration. "But we are confident we can continue to offset that." The company reported quarterly net income of $1.05 billion or $1.43 per share, a drop of nearly 60 percent from $2.61 billion or $1.75 per share a year earlier. Analysts had on average expected earnings per share of $1.24.