For Sale Or Trade 1968 Chevrolet C10 Step Side Truck on 2040-cars
Oskaloosa, Iowa, United States
For sale or trade is a 1968 C10 step side. It has a fresh 355/350 with less than 25 miles on both and basically broke in. The transmission has a 4500 stall which is a little much for the street so I do have a 2800 that could be swapped out. The 355 is a 4 bolt main with H beam rods and a solid lifter cam. Tranny has a shift kit and is built well. The truck was freshly painted last spring and has no rust. All window regulators are new along with new seals and anti rattle felt for the windows. New carpet, dash pad, and the interior side of he doors have been painted. It has a new oak bed and all exterior lights and reflectors are new. I have way to much time and money in this truck so I am willing to do some trading. Let me know what you have Pre (1972) I own a rod garage and work on projects all the time so don't be shy yours may be my next project. Thanks for looking Call Craig 641-660-9837. I do reserve the right to end the auction early.
|
Chevrolet C-10 for Sale
Auto Services in Iowa
Yaw`s Auto Salvage ★★★★★
Virgil`s Sinclair & Repairs ★★★★★
Smith Auto ★★★★★
Scotty`s Body Shop ★★★★★
Sanders Auto Lab ★★★★★
Reliable Autobody & Cycles ★★★★★
Auto blog
GM recalls 83,572 SUVs for ignition switch issue
Sun, Jan 4 2015General Motors is recalling 83,572 SUVs from the 2011 and 2012 model years over a potential ignition lock actuator issue. In affected vehicles, the actuator isn't the right size, which could cause the ignition to get stuck in the "Start" position, and then either due to a jarring event or a "cool interior temperature" the ignition could switch back to the "Accessory" position. Doing so would cause a loss of power assistance and the airbags might not deploy. This is a different ignition issue than the one that's been ongoing for the past year. GM said it expects that less than 500 vehicles suffer from the problem, but that the pool could include vehicles from 2007 through to 2014 that have already been fixed, but with defective parts. The 2011-2012 SUVs included in the National Highway Traffic Safety Administration notice: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. GM will notify owners and dealers will inspect the ignition lock housing to see if it needs a free replacement. RECALL Subject : Ignition Lock Actuator may Bind Report Receipt Date: DEC 30, 2014 NHTSA Campaign Number: 14V827000 Component(s): ELECTRICAL SYSTEM Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2011-2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. In the affected vehicles, the ignition lock actuator may bind, making turning the key difficult or causing the ignition to get stuck in the "Start" position. CONSEQUENCE: If stuck in the "Start" position, the ignition may suddenly snap back into the "Accessory" position, causing a loss of engine, steering, and braking power, increasing the risk of a vehicle crash. If the vehicle is in a crash, the air bags may not deploy, increasing the risk of occupant injury. REMEDY: GM will notify owners, and dealers will inspect and replace the ignition lock housing, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact GM customer service at 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14696 for the original equipment, and 14912 for the service replacement parts.
First 2015 Chevy Corvette Z06 engine blows up at just 891 miles
Thu, Jan 1 2015You've waited and watched and waited some more for the arrival of your 650-horsepower, $78,000 Chevrolet Corvette Z06. Finally, that joyous day arrives and you eagerly, but gingerly, begin to break-in the 6.2-liter supercharged V8 monster under your hood. Then 900-odd miles after delivery, your excitement grinds, quite literally, to a halt. That's what the owner of one 2015 Z06 claimed happened to him when a simple break-in drive resulted in a lunched engine. The owner, known as Lawdogg149 on Corvette Forum, says he was out breaking-in his car ahead of a January track event when it happened. "While making a pull from 35 miles per hour, I accelerated and shifted short of redline, and boom - the car began knocking. I pulled over and popped the hood. I could hear a loud knock coming from the No. 6 cylinder area along with a serious, grinding, metal-on-metal sound coming from the supercharger area," Lawdogg wrote. A subsequent trip to the dealer confirmed his concerns, with the service facility telling Lawdogg that the No. 6 valvetrain had failed. The dealer couldn't research the issue further, though, as General Motors requested the engine be returned for a more thorough evaluation. The good news for the Z06's unlucky owner, at least, is that GM will be covering the engine replacement under warranty, an expense that Corvette Forum estimates is a nearly $24,000 procedure. At this point, the two leading theories behind the engine's detonation involve a manufacturing defect – which could be why GM is so keen to tear the blown powerplant down – or a mistake on the part of Lawdogg. As Motor Authority points out, such an error could be something as simple as the Z06's owner accidentally shifting to first rather than third during his 35-mph pull. If, however, there's a deeper manufacturing problem with the Z06's engine, this might not be the only case we end up hearing about.
Autoblog Podcast #327
Tue, 02 Apr 2013New York Auto Show, Jim Farley interview, 2014 Chevrolet Silverado fuel economy, Ford fuel economy app challenge
Episode #327 of the Autoblog Podcast is here, and this week, Dan Roth, Zach Bowman and Jeff Ross talk about this year's New York Auto Show, Chevrolet's latest assault in the pickup truck fuel economy battle, and Ford's reward for developing a better fuel economy app. Dan also has an interview with Ford's Jim Farley about the future of Lincoln. We wrap with your questions and emails, and for those of you who hung with us live on our UStream channel, thanks for taking the time. Keep reading for our Q&A module for you to scroll through and follow along, too. Thanks for listening!
Autoblog Podcast #327: