78 Gmc Sierra Grande Heavy Half Pick Up Big 10 73k Miles 1 Family Owner Cold Ac on 2040-cars

Auto blog

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:

GM's European Opel division may eventually go all-electric

General Motors' Opel division in Europe may transform itself into an all-electric vehicle maker by 2030. Granted, a lot can happen between now and then, including a potential buyout by French automaker PSA Group. Regardless, Opel appears to view its electric future beyond the Ampera-e, which is the sister vehicle to the Chevrolet Bolt, and more like Tesla. Opel CEO Karl-Thomas Neumann indicated that focusing on electric drivetrains would be a superior strategy to expanding its EV technology while pushing forward with conventional drivetrains, says Automotive News Europe, citing comments Neumann made to German publication Manager Magazin. General Motors could make the decision to move towards an all-electric vehicle line for Opel as soon as May. Of course, that depends on whether Opel is bought out by PSA, the parent country to Peugeot and Citroen. PSA is in talks to buy General Motors' Opel and Vauxhall divisions, though government and labor representatives in Germany have expressed concerns over potential job losses from the proposed buyout, Reuters says. Regardless, GM has hinted at expanding its electric-vehicle line far beyond the Bolt, which has a 238-mile single-charge range and debuted late last year. Mary Barra, in an interview with CNET, said the Bolt's all-electric platform could be applied to a "huge range of vehicles," though wasn't specific about additional EV models. Opel first showed off its Ampera-e at the Paris Motor Show last fall. The name of the model raised some eyebrows because the Ampera badge had been previously used by Opel for the sister version of the Chevrolet Volt extended-range plug-in. Either way, Opel is looking to take on Renault for electric-vehicle sales supremacy across the Pond. Related Video:

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.