41365662 on 2040-cars

Auto blog

Weekly Recap: Autonomous driving goes commercial in Nevada

Nevada granted Daimler Trucks North America the first license to run an autonomous commercial vehicle on public roads in the United States Tuesday, marking another milestone in the technology's rapid advancement. Gov. Brian Sandoval and Daimler truck chief Wolfgang Bernhard promptly used the license to lap Highway 15 near Las Vegas in a newly revealed Freightliner Inspiration Truck. It was a clear signal that autonomous driving is big-rig reality, though it's still a long way from widespread use. Nevada certified two of Daimler's Freightliner Inspiration Trucks, which use the company's Highway Pilot system with a stereo camera, radar, and lane-keeping collision-prevention features to regulate the brakes and steering. The radar component has a long-range sensor that can cover 820 feet at an 18-degree angle and a shorter-range unit that stretches 230 feet at a 130-degree angle. The Inspiration trucks are based on the existing Freightliner Cascadia Evolution model used on US roads. In addition to the autonomous technologies, it also has futuristic design cues, including blue lighting in the front and a new hood and grille. While there are only two Freightliner Inspiration trucks in existence, Daimler expects to bring the Highway Pilot system into mass-produced big rigs by 2025, in time to capitalize on the market's predicted growth. The German truckmaker predicts the global hauling market will triple by 2050, and the United States will be a key part of that growth. Trucks carry 69.1 percent the nation's domestic freight tonnage and hauled 9.7 billion tons of freight in 2013, according to the American Trucking Association. Daimler expects autonomous driving to augment this growth, and perhaps evolve the role of the truck driver. Still, the company points out autonomous tech is not meant to replace drivers, but to assist them and relieve fatigue and monotony on long hauls. The driver has to stay in control for passing, in city traffic, and when hooking up the trailer. The company said autonomous driving also offers the potential for improved fuel economy – tests showed a five-percent gain – and lower maintenance costs. Daimler also said the technology could reduce congestion on the road. Much of this is attributable to the constant flow of traffic, which is aided by autonomous driving. While the benefits are becoming increasingly apparent, autonomous technology is still met with skepticism.

Foreign automakers pay from $38 to $65 per hour to non-union workers

As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: