1978 Chevrolet C10 Pickup - Custom One Of A Kind, Cruise The Summer In Style on 2040-cars
Cheyenne, Wyoming, United States
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:350
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Make: Chevrolet
Model: C-10
Trim: Pickup
Options: Leather Seats
Drive Type: automatic
Mileage: 99,999
Exterior Color: Black/Orange
Warranty: Vehicle does NOT have an existing warranty
Interior Color: Tan
Up for grabs is our custom one-off No Coast Speed Shop shop delivery truck. We started building this truck with every intention of using it as our shop vehicle, but we ended up with something that we could use to pull our trailer as well, so it's services are no longer needed.
It is a 1978 Chevy C10 RUST FREE (lived it's life in Wyoming) Short Bed Pickup. It has what I believe to be a 350, I have not run the number, and I assume it to be the original motor. Runs good, has a Holley 4-Barrel with a Turbo 350 Transmission. Power Steering, but no power brakes, that was something that we planned on updating and is easily done but adding a vacuum booster. The truck runs and drives fine, however there are a few minor things that need finished. It needs the complete door rubber for both doors (jam seals, window runners, etc) these are available through LMC Truck or right here on Ebay. I have the bumper, door panels and marker lights, which I will include. Also there is a small oil leak at the back of the motor, it appears to be the oil pan gasket although I have never looked into it. The truck features 6-way electric leather bucket seats (from a Lexus), new carpet, a nice Blazer console, Custom behind Grill Lighting, and Custom Corvette Style Rally Wheels with newer tires. The paint is PPG Vitamin C Orange and PPG MP172 Epoxy Primer. This will allow you to change the bottom and spend the time doing the body work if you'd prefer a nicer paint job.
For further questions and details, send an email or call 970-682-5263.
We are offering FREE SHIPPING in the Lower 48 States (sorry Alaska & Hawaii). Now that we are out of winter, it generally takes 1-2 weeks total.
Enjoy the Summer - This truck is Ready to Cruise!
Chevrolet C-10 for Sale
!!! 1972 chevrolet c-10 2wd short box texas truck factory air !!!
1965 chevy shortbed fleetside project,rat rod,hot rod,
1971 chevy c-20 custom deluxe factory big block a/c original
1972 chevy c-20
1966 chevrolet c-10 big window long bed 292 4spd
1972 chevrolet, zz-4 engine---original body/interior**** 425 h.p.
Auto Services in Wyoming
O`Reilly Auto Parts ★★★★★
HMH Truck Repair Shop ★★★★★
Greiner Motor Company - Casper ★★★★★
Decker Auto Glass ★★★★★
Casper Auto Supply ★★★★★
Auto Electric ★★★★★
Auto blog
NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV
Tue, Feb 23 2016The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video:
GM to build outgoing Silverado and Sierra until late 2019
Tue, Nov 6 2018As it has done with previous generations, General Motors is keeping the outgoing versions of its 1500 pickups in production despite the arrival of the all-new 2019 Chevrolet Silverado and 2019 GMC Sierra. The production of the previous, K2 generation models will begin to be wound down gradually, according to Automotive News, starting with crew cabs "early next year," and double and regular cab models following during "the early second half of next year." The old model trucks will continue to be built into "late 2019" based on market demand, GM's spokesperson Kim Carpenter said. The Chevrolet will go by the name Silverado LD, with the GMC Sierra designation still to be announced. Some of the outgoing models are built by sharing the assembly work between two GM plants. Partially finished Silverado and Sierra double cab bodies are shipped from Fort Wayne, Ind., to Oshawa, Ont., where the trucks are completed, including receiving paint. This eases the workload in Fort Wayne, where production of the new T1 generation trucks started in July 2018. In January, the Silao plant in Mexico will take on the duties of building new generation regular cab and crew cab trucks. Carpenter also said that the "Oshawa shuttle," as the shared production is called, has been very successful. As a result, 60,000 more trucks will be built than what the original production forecast initially called for. GM's latest quarterly profits, disclosed last week to be $1 billion, have been far higher than expected and will result in full-year profits far higher than what had been predicted in light of steel tariffs. GM isn't the only truck maker taking a similar multi-generation approach for 2019. Both the outgoing and redesigned Ram 1500 are in production, with the previous generation being dubbed Ram 1500 Classic. Related Video:
How GM engineers are using diaper 'snow' to keep you warm
Thu, Jan 8 2015Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.