1969 Chevrolet Chevy C-10 on 2040-cars

Auto blog

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

Chevy Sail 3 lands in China

Shanghai General Motors took 32 cars to this year's Guangzhou Motor Show, with its Chevrolet Sail 3 leading the way. After putting almost 1.4 million of them into Chinese hands, the third generation of the Bowtie's entry-level sedan wants to "take the nameplate and the segment to a new level." Its new architecture sporting a 1.4-inch longer wheelbase supports a growth spurt of two inches in length and 1.8 inches in width. The exterior also gets "eagle eye-shaped" headlights and "dual-c-element taillights." Under the hood will be either a 1.5-liter DVVT or a 1.3-liter VVT, each of them more powerful and more frugal than previous offerings. Both can be paired with a manual or an automatic transmission, and qualify for listing in China's National Energy-Saving and Eco-Friendly Vehicle Catalogue, as well as a 3,000 renminbi rebate ($490 US). You can read more about it in the press release below, and get more info on the Chevrolet Camaro RS Limited Edition, Corvette Stingray Coupe, Buick Regal GS and Excelle XT also introduced at the show. Chevrolet, Buick and Cadillac Take Center Stage at Guangzhou Auto Show - New Chevrolet Sail 3, Camaro RS Limited Edition and Corvette Stingray Coupe make China debut - Buick showcases customized Regal GS and Excelle XT - Shanghai GM announces new telematics strategy featured in upcoming Cadillac product GUANGZHOU, 2014-11-20 – Shanghai GM is displaying 32 vehicles from the Chevrolet, Buick and Cadillac brands at the 12th Guangzhou International Auto Show, which begins today and runs through November 29 in Guangzhou. Among the products that are making their China debut are the third-generation Chevrolet Sail 3, Chevrolet Camaro RS Limited Edition and Chevrolet Corvette Stingray Coupe. In addition, Buick is showcasing a customized Regal GS and Excelle XT, and Shanghai GM is announcing its new telematics strategy that will be featured in an upcoming Cadillac product next year. Chevrolet Sail 3 Entry-Level Family Car Since its introduction 15 years ago, the Sail has been a driving force in the entry-level family car segment. Nearly 1.4 million Sails have been sold across China. The third-generation Chevrolet Sail, named the Sail 3, will take the nameplate and the segment to a new level when it goes on sale nationwide by the end of this year. Built on Shanghai GM's new-generation small car architecture, the Sail 3 has adopted Chevrolet's new design language. It has a sculpted yet slim exterior with a youthful, dynamic feel.

Chevy's latest Silverado videos assume we're idiots

UPDATE: This article has been revised to reflect that any mention of materials used in a future Chevrolet Silverado is speculation. Can we have a sound, rational debate about the merits of aluminum versus steel? According to Chevrolet's latest marketing videos pitting the Silverado against the Ford F-150, the answer is no. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of course, this will all be a hilarious joke when an aluminum-bodied Silverado comes in 2018. That's an if, as a member of the General Motor public relations team has reminded me that any articles regarding future product are pure speculation. Until then Chevy needs to sell the current Silverado, with its body comprised chiefly of steel, against the Ford F-150's lightweight aluminum panels. Instead of touting the merits of the "most-dependable, longest lasting pickup," the strategy seems to center around negative propaganda towards the 13th element. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of the three videos, the most fair is Silverado vs. F-150 Repair Costs and Time: Howie Long Head to Head. Basically: aluminum costs more than steel, it's more difficult to repair, and requires special equipment for body shops. In terms of Chevy versus Ford, the blue oval truck costs more and takes longer to repair - an average of $1,755 more and 34 more days in the shop, according to the ad. But why stop there when you can have pitchman Howie Long raising an eyebrow at random facts? When Silverado Chief Engineer Eric Stanczak says of the Ford, "It's manufactured in a way that combines aluminum, rivets, and adhesive in a process that's different than Silverado." Long responds, "Huh. Interesting." At the end of the video, Long says "I'd be interested to know what happens to insurance costs." Note he's not saying anything substantive. If Chevy's legal team could sign off on some facts about insurance rates, it would be in this ad. On our Autoblog Cost to Own calculator, there is no significant difference in projected insurance costs between the two trucks. But at least that ad has facts. The other two videos are pure hype. In Cages: High Stength Steel, real people are asked what they think of aluminum and steel in a room with two cages. Then a bear is released into the room, and the subjects scurry to the safety of the steel cage.