1995 Chevrolet Blazer Lt 4wd For Parts Or Whole, Engine Doesn Not Run on 2040-cars

Auto blog

GM recalls 200k Hummer H3s for fire risk

An issue with fires erupting in some Hummers has prompted General Motors and the National Highway Traffic Safety Administration to issue a recall for nearly 200,000 vehicles around the world. The bulk of them are in the United States. According to the first statement (below) obtained by Autoblog from GM, the issue stems from the HVAC system in Hummer H3 models. The connector module for the blower motor has, in certain cases, overheated, melted the surrounding plastic, and started a fire. 42 such cases have been reported, including three instances of occupants citing minor burns. GM confirms that two of those three cases lead to the vehicle being destroyed in the fire, but states that no crashes or fatalities have resulted. The issue affects 196,379 examples of the 2006-10 H3 wagon and the 2009-10 H3T pickup, with 164,993 estimated to be in the United States. In order to fix the issue, dealers are being instructed to replace the relevant parts of the connector and harness. In a second, unrelated campaign, GM is also calling in 50,731 Chevy Spark and Sonic small cars – 45,785 of them in the US – due to a software glitch. In those affected vehicles fitted with the base radio and OnStar system, the audio system may not be able to switch out of turn-by-turn direction mode, causing the display to go blank and all sound to mute – including key safety warnings. In addition, the system may not switch off, draining the battery. GM states that no crashes, injuries, or fatalities have resulted from this issue, and all that dealers will need to do in this case is reflash the software. Related Video: General Motors is recalling 164,993 2006-2010 model year HUMMER H3 and 2009-2010 model year HUMMER H3T models in the U.S. In certain vehicles, the connector module that controls the blower motor speed in the heat/vent/air conditioning (HVAC) system may overheat under extended periods of operation at high- and medium-high speeds. The heat could melt the plastic surrounding the connector module, increasing the risk of a fire. Dealers will replace the affected portion of the connector and harness. GM is aware of three reported minor burns and 42 fires but no crashes or fatalities related to this condition. Including Canada, Mexico and exports, the total recall population is 196,379. ### General Motors is recalling 45,785 2014-2015 model year Chevrolet Sparks, and 2015 model year Chevrolet Sonics in the U.S.

1983 Motorweek showdown pits Porsche 928S vs. Chevy Camaro Z28

Last month, Motor Trend threw the Camaro Z/28 and Porsche 911 GT3 into the bear pit and let them fight it out. Way back in 1983, MotorWeek had the same idea, comparing the Camaro Z/28 to the Porsche 928S. At the time, the Camaro was America's best selling sports coupe, the 928S was Porsche's top-of-the-line model that also had the highest top speed of any car sold here. And the price differential was even more stark then: $13,600 for the Camaro, $45,000 for the Porsche. That put the Z/28's cast-iron, 5.0-liter V8 with 190 horsepower and 240 pound-feet of torque against the all-aluminum 4.7-liter V8 with 234 hp and 263 lb-ft in the 928S. Even with that and the Camaro being 14 inches longer than the Porsche, the American was a surprising 40 pounds lighter than the German. The show took them to Summit Point Raceway in West Virginia to see how close a relative performance bargain could hang with a the German GT. Both had five-speed manual transmissions, but the high-speed corners and tight sections of Summit Point would test other handling variables, including the "bone-rattling" Camaro's solid rear axle and disc and drum brake setup vis-a-vis the four-wheel disc brakes and independent suspension on the "firm-but-smooth" Porsche. Paradoxically, the larger disparity 22 years ago resulted in a closer result. Check out the video to see how the Summit was won. News Source: MotorWeek via YouTube Chevrolet Porsche Coupe Luxury Performance Classics Videos chevy camaro z28 porsche 928 retro review

This is how GM is hiding new Chevy Volt in public

General Motors is letting the public know that, well, it's not about to let the public know anything else about the next-generation Chevrolet Volt. But the automaker is willing to talk about its camouflaging process for upcoming versions of the extended-range plug-in. So it's a half-hearted secret, at best. GM actually has a "camouflage engineer" charged with creating ways to disguise the styling of new vehicles. In the Volt's case, the company is applying black and white swirly color patterns on top of the materials, such as plastics, vinyl and foam, that are used liberally across the body. It's all part of a teaser campaign that started last month with pictures of part the 2016 Volt. Earlier this month, GM said it was keeping track of Volt drivers' habits as it works on the next-gen model. The company noted that more than four out of five trips are being made in all-electric driving mode, and that 60 percent of Volt owners use a plain-old 100-volt outlet to recharge their cars. The car is slated to make its global debut at Detroit's North American International Auto Show next January, and the early word is that performance and all-electric range will be improved (we should hope so). The car will also be sleeker. By how much, we can't tell yet, because of those darn swirly patterns. GM's got more non-details in its press release below. Engineers charged with hiding styling while vehicle testing proceeds in public DETROIT – The styling of the next-generation Chevrolet Volt is one of the automotive world's best-kept secrets. Keeping customers and media eager to see the successor to the groundbreaking original at bay until the new Volt debuts at the North American International Auto Show in Detroit in January is tricky business. First, it is engineers, not designers, who are charged with creating camouflage that balances styling secrecy with the need to validate the Volt and its systems in public. "If it were up to me it would be a shoebox driving down the road," said Lionel Perkins, GM camouflage engineer. "The design team wants us to cover more of the vehicle and the engineering team needs to have enough of the vehicle's weight and aero exposed so that the tests in the development process are consistent with the product that will come to market." The engineers responsible for the "cool" designs covering the car might deserve style points but their efforts are intended strictly to hide the metal beneath.