Chevrolet Bel Air/150/210 Bel Air on 2040-cars

Auto blog

2014 Chevrolet Silverado and GMC Sierra debut all-new designs, three new engines

General Motors has finally dropped the curtain on the 2014 Chevrolet Silverado and 2014 GMC Sierra. Both trucks have undergone substantial revisions with updated versions of the company's 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 engines. In a shot across the bows of both Ford and Chrysler, GM says it won't use a V6 engine adapted from passenger car applications. Instead, it developed the 4.3-liter engine based on its proven truck-duty architecture.
All three mills will boast direct injection fuel systems as well as a new cylinder head design. Combined with a revised piston, the new engines feature a smaller combustion chamber with a compression ratio of 11:1 or higher depending on the application. Cylinder deactivation and continuously variable valve timing are all part of the recipe, and each engine is paired with a six-speed automatic transmission with auto grade breaking. So far, no fuel economy or horsepower figures have been released, though GM says the new engines will best their predecessors in both areas.
Outside, the trucks feature a number of enhancements to reduce drag and wind noise, and GM claims both the Silverado and Sierra will offer buyers some of the quietest cabins in the class. Extended cab models now feature front-hinged rear doors to allow easier access to the back passenger area, and Crew Cab buyers can now select between a five-foot, eight-inch bed or a six-foot, six-inch bed. Buyers with a mind toward going off road will also rejoice in the return of the Z71 package, complete with Rancho shocks, front tow hooks and additional under-body protection.

Chevy Colorado and GMC Canyon get trim levels reworked again

GM Authority reports that GM has fiddled with trim packages on the Chevrolet Colorado and GMC Canyon for the 2021 model year, eliminating the base trims on both pickups and implementing small price changes. When the new model year goes on sale, the Chevy will lose the rear-wheel drive Base Extended Cab with the automatic transmission that starts at $22,395 after a $1,095 destination charge. The new entry-level is going to be the Work Truck model with the extended cab in rear-wheel drive, starting at $26,595 assuming the destination charge holds steady. That represents a $4,200 jump over the base 2020 model. MSRPs for the entire Work Truck lineup, from base to the Crew Cab Long Box, rise by $400. Elsewhere in the Colorado line, the four Z71 trims go down by $100, while the two ZR2 trims increase by the same amount. Only the six LT trims don't see any change.  The GMC side is a bit more involved due to previously announced changes. The 2020 Canyon comes in SL, Base Canyon, SLE, SLT, All Terrain, and Denali steps. Last month, GM Authority reported the 2021 Canyon would give all that up for the new names Elevation Standard, Elevation, AT4, and Denali. Since the SL base model retires in 2021, the Elevation Standard takes over at the entry level. Unlike on the Colorado, which sheds one trim, the Canyon lineup gets pared from 20 total combinations of trims, cab sizes, and bed lengths, to 14 total combinations. But like the Colorado, due to the loss of the cheapest configuration, the least expensive 2021 Canyon becomes $4,200 more expensive than in 2020, assuming the destination price remains the same. What's more, the 2021 Elevation Standard pricing adds $700 or $800 to the prices of the 2020 Canyon base and SLE models. There are more increases up the range. The 2021 Elevation trim replaces a combination of SLE and SLT models, bumping prices up by up to $900. In 2020, the least expensive All Terrain model is the Extended Cab Cloth for $37,695. For next year, the least expensive AT4 trim is the Crew Cab Short Box for $39,295. Like-for-like, though, the AT4 represents a $300 premium over the 2020 All Terrain Crew Cab Short Box. Three Denali trims will still stand at the top of the heap, each one going up by $400 in 2021. Until GM details the equipment changes, we won't know how the new pricing equates to value.

J.D. Power study identifies top seats for your tush

File under News your fanny can use: The seating systems in the Ford Escape and Edge, the Audi A3, Chevrolet Cruze, Kia Cadenza, Porsche Cayenne and Toyota Tundra received top marks in a new J.D. Power study on seating and seat belt quality and satisfaction. The J.D. Power 2017 Seat Quality and Satisfaction Study asked more than 77,000 new owners and lessees of 2017 model-year cars and light trucks to rate their vehicle's seats and seat belts within the first 90 days of taking ownership. The survey is broken up into seven vehicle segments and scored on total seat problems per 100 within each segment, with awards presented to the seating system supplier. Canadian auto supplier Magna won three of seven first-place awards for its seating systems in the A3, Escape and Edge. Ireland-based Adient got top marks for its seats in the Cadenza and Cayenne. Lear Corp. won for the Cruze, and Avanzar Interior Technologies scored highest for seats in the Tundra. J.D. Power says its study is intended for automakers and suppliers with quality and satisfaction information to be used in developing and marketing seating systems. "But the results are just as interesting to a consumer audience," the company says. "After all, some drivers spend a considerable amount of time behind the wheel, and it's helpful to know which vehicles offer the most comfortable seats for those long commutes." Ain't that the truth. Ford was the only automaker whose seat systems, both manufactured by Magna, received top honors in two segments: the Escape for mass-market compact SUV and the Edge for mass-market midsize/large SUV. J.D. Power says it used 22 attributes to measure seat quality, three measures of seat belt quality and 12 to measure satisfaction. Awards were presented to the seating suppliers. Related Video: Image Credit: Audi Auto News Design/Style Audi Chevrolet Ford Kia Porsche Toyota Safety JD Power seats