1957 Chevrolet 210 4 Door on 2040-cars
Oak Harbor, Washington, United States
For Sale By:Private Seller
Engine:350 V8
Exterior Color: blue and white
Make: Chevrolet
Warranty: Vehicle does NOT have an existing warranty
Model: Bel Air/150/210
Trim: 210
Mileage: 100,000
Drive Type: Turbo 350 automatic
Car has spent most of its life in southern California. The car was undercoated when new and has no rust in bloor boards or trunk. It does have some small rust spots in the corners of the doors. The front fenders have new lower panels installed. The car has been rebuilt from the firewall forward including the following:
Rebuilt 350 V8, turbo 350 transmission, front end, new shocks, new motor mounts, radiator, u-joints, brakes shoes, wheel cylinders, and new drums on the front. New rubber and bolts on the front end assembly. New Edelbrock 600 cfm carburator, new Pertronix solid state distributor, new water pump, flex fan, and fan shroud. Replaced the old standard heater with a Deluxe heater and controller with rebuilt heater core. New solid state 57 chev look a like radio. Wiring completely gone through and all electrical working as new. The hard work has been completed. The car drives, stops, but needs finished, it is driven daily. The car has a small leak in transmission where the shift lever exits the transmittion. Has small leak at rear main seal. The brakes need adjusting and the front end needs alignment since the over haul. Almost new 14 inch tires on SS chrome wheels. New exhaust system simular sound as Ford GT mustangs. The motor is stock, was not built for performance, just dependable street car. Interior is original, the front seat has some tears in it and the back of the head liner has a few small splits. Have many used and new parts that go with the car. Over $12,000 invested and a year of labor.
Chevrolet Bel Air/150/210 for Sale
Auto Services in Washington
WheelKraft NW ★★★★★
Westside Import Repair ★★★★★
West Coast Auto Glass Inc ★★★★★
Wayne`s Gold Seal Auto Repair ★★★★★
Tomoko Auto Care Ctr ★★★★★
Texaco Xpress Lube ★★★★★
Auto blog
GM Design shows what could have been and what might be
Thu, May 27 2021We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.      View this post on Instagram            A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.      View this post on Instagram            A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:
8 cars we're most looking forward to driving in 2015
Mon, Jan 5 2015Now that 2014 is officially in the books, it's time to look ahead. And following our list of the cars we liked best last year, we're now setting our sights at the hot new metal that's coming our way in 2015. Some of these, we've already seen. And some are still set to debut during the 2015 auto show season. But these are the machines that keep us going – the things on the horizon that we're particularly stoked to drive, and drive hard. Jeep Renegade Not the Chevrolet Corvette Z06. Not the Ford Mustang GT350. Not the new John Cooper Works Mini. Nope, I'm looking forward to the adorable, trail-rated Jeep Renegade. And that's because I really, really, really like our long-term Jeep Cherokee Trailhawk. I do not, however, care too much for the Cherokee's looks, and I really don't like its $38,059 price tag. The Renegade Trailhawk, meanwhile, promises much of the same rough-and-tumble character as its big brother, but at what we expect will be a more reasonable price (I'm personally wagering on the baby Jeep's off-road model starting at no more than $23,000). With a 2.4-liter four-cylinder and a nine-speed automatic, it should also be a bit easier to fill than the V6-powered Cherokee. Also, I can't help but love the way the Renegade looks. It's like someone took a Wrangler, squished it by 50 percent and then handed it off to George Clinton for a healthy dose of funk. The interior, with its bright, expressive trims and color schemes should also be a really nice place to spend some time. I'll be attending the Renegade's launch later this month, so I'll have a much shorter wait than my colleagues. Here's hoping the baby Jeep lives up to my expectations. – Brandon Turkus Associate Editor Mazda MX-5 Miata Here's an uncomfortable truth: I'd rather spend a day driving a properly sorted Mazda MX-5 Miata of any generation on a winding road than I would nearly any other vehicle, regardless of power, price or prestige. It's not just that I prize top-down driving and enjoy the Miata's small size because it gives me more road to play with. I just find there's more motoring joy to be had with high-fidelity handling and an uncorrupted car-to-driver communication loop than I do with face-distorting power or grip – let alone valet-stand gravitas. But perhaps most of all, I love Miatas because they can deliver that level of feedback and driver reward at modest speeds that won't put the locals on edge or endanger lives – you can use more of the car more of the time.
Huge, pricey trucks haul jobs and profits for the Detroit Three
Tue, Feb 5 2019DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.