1955 Chevrolet Bel Air Onyx Black & White Original 265 on 2040-cars

Auto blog

This SEMA special drag race is absurdly awesome

The SEMA Show came and went last month, and it showed us a ton of heavily modded goodies to dream about during the long, cold winter. The Motor Trend Channel on YouTube is keeping the party rolling a little longer, though, with a drag race inspired by the aftermarket event. All of the hosts were supposed to borrow a vehicle from the show for the big race, but only two of them actually cajoled companies into lending their wares. Still, the result includes four very cool and extremely different examples of the breadth of the automotive hobby. First up, there's a 1955 Chevrolet with a 535-cubic-inch (8.8-liter) Hemi V8 stuffed under the hood. Appropriately, it's dubbed the Blasphemi, and with skinny tires up front, fat rubber in the rear and a stripped interior, this this is made to go very fast in a straight line. Next, there's a stock Dodge Challenger SRT Hellcat boasting 707 horsepower. Plus, host Jessi Lang has her dog riding shotgun for the race. A Chevy Sonic RS with some body mods, downpipe and intake is also competing. Finally, the most bizarre of the quartet is a custom 1958 Jeep Forward Control with a 5.7-liter Hemi V8 and treads to replace the wheels. Obviously, the Blasphemi and Hellcat are the only two that really have a chance of winning, but check out the video to see which one crosses the finish line first. News Source: Motor Trend Channel via YouTube Aftermarket Chevrolet Dodge Jeep Truck Coupe Hatchback Off-Road Vehicles Racing Vehicles Performance drag race dodge challenger srt hellcat

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.