1954 Chevy Survivor Pwr Window Pwr Seats Powerglide Automatic Patina Barn Find on 2040-cars

Auto blog

GM recalls 3.8 million vehicles in North America due to braking issue

WASHINGTON — General Motors Co said Wednesday it was recalling 3.46 million U.S. pickup trucks and SUVs to address a vacuum pump issue that could make braking more difficult and that has been linked to 113 accidents and 13 injuries. The recall covers 2014-2018 model year vehicles, including some Cadillac Escalade, Chevrolet Silverado, Chevrolet Tahoe, GMC Sierra, Chevrolet Suburban and GMC Yukon vehicles. In late June, GM recalled 310,000 vehicles in Canada for the same issue. GM did not immediately explain why the Canadian recall occurred more than two months before it called back the vehicles in the United States. The recall was triggered because the amount of vacuum created by the vacuum pump may decrease over time, GM told the National Highway Traffic Safety Administration (NHTSA) in documents posted on Wednesday. The NHTSA opened a preliminary investigation into the issue last November, and said it had reports of nine related crashes and two injuries. It provided GM in July with additional field reports that prompted the automaker to open an investigation. GM said it could affect braking in "rare circumstances." The NHTSA said in a statement the "vehicles may experience brake boost failure, which would require increased brake pedal effort, leading to a hard brake pedal feel, and potentially increased stopping distance." GM said dealers will reprogram the electronic brake control module to improve how the system utilizes the hydraulic brake boost assist function when vacuum assist is depleted. GM said the vacuum assist pump, which is lubricated with engine oil that flows into the pump through a filter screen, can in some cases lose effectiveness over time, as debris such as oil sludge can accumulate on the filter screen. GM told NHTSA that prior model years used a different brake assist system design, and vehicles manufactured after 2018 were not equipped with the affected pump design. Separately, GM said on Wednesday it is recalling 270,000 additional U.S. vehicles in three smaller recalls, including 177,000 2018 Chevrolet Malibu cars with 1.5L turbo engines because an error in the engine control module software may result in the fuel injectors being disabled.

Here are all the cars GM is axing as part of its restructuring

GM plans to kill off a couple of great and a few meh cars as part of its restructuring. Here's a rundown of all the cars being phased out of production. None of the vehicles GM axed were SUVs or crossovers. Instead, it was an action reminiscent of what Ford recently decided to do by discontinuing U.S. sales every Blue Oval sedan. GM just didn't explicitly say, "We're killing our cars," like Ford did — probably a smart move by GM. Keep scrolling down to see the full list of deceased GM models. Chevrolet Volt This one was the most surprising of all the cars GM decided to can, primarily because cars with plugs are supposed to be our future. However, maybe consumer demand just isn't quite there yet for a plug-in like the Volt. We came up with all sorts of ideas for what was to blame for the untimely demise of the Volt, so go check that out for a full breakdown of the situation. Cadillac CT6 Here's another car we'll be sad to see go. Cadillac's flagship sedan was such a joy to drive, and it served as the conduit to deliver GM's semi-autonomous Super Cruise system, which still hasn't been surpassed by any other company's technology in our books, even Tesla's Autopilot. That being said, GM does plan to produce the CT6 until March, with the last cars coming off the line set to be twin-turbo V8 V-Series models. If it's going to go, this seems like a pretty great way to make an exit. We'll be patiently awaiting the next flagship Cadillac once this one finally fades away. Chevrolet Impala The Impala is actually a pretty good car. It doesn't sell terribly, and we think it's a completely satisfactory car to drive. However, people would rather have a Traverse or Equinox these days, making the Impala one of the vehicles to find itself on this list. Chevrolet is keeping its smaller brother, the Malibu, but a big, full-size sedan just isn't what people are ordering up these days. It's unfortunate to see it go, but we won't be broken up over it. Chevrolet Cruze We wouldn't rank the Cruze at the top of the compact car class, but if you were looking for a small, cheap American car, it was either this or the Focus. The Cruze had the potential to be a true small performance car if Chevy had ever wanted to make it into one. But sadly, we're seeing it bow out before Chevy ever tried to slot a hot engine and suspension in there to make it competitive with other hot hatches. A Cruze SS would have made enthusiasts take notice.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck