2010 Chevrolet Avalanche 1500 Ls on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

These are 2014's best-selling cars and trucks

Now that 2014 is no more than a set of numbers on spreadsheets, at last, the grist mill gets its first real load to chew on. The number one selling vehicle in America last year was the Ford F-Series, a fact that should surprise you only if your family name is Van Winkle and your naps tend to last 38 years, which is how long the Ford pickup has ruled our buying landscape. Even though series sales were down 1.3 percent, it still racked up 753,851 units. That's 2,065.3 sales per day, every day, all year. The Chevrolet Silverado, up 10.3 percent for the year, was still a daylight second at 529,755 units. The cab-and-bed love continued into third place with the Ram 1500-3500 trucks, gaining 23.6-percent year-on-year to clock 439,789 units. The robust turnout at The Bighorn and Jeep helped Fiat-Chrysler increase its sales by 16 percent, past the two-million mark. Our number one car? The Toyota Camry, staying in first place with a 4.9-percent sales boost to 428,606 sales, trailed again by the Honda Accord at number five with 388,374 sales. Accord sales rose six percent, and if it's any consolation to Honda for coming in second - not that it needs one - it is the only manufacturer to have three vehicles in the top ten. The rest of the list: the Nissan Altima with 335,644 sales (+4.7%), the Honda CR-V with 355,019 (+10.2%), the Toyota Corolla/Matrix combo with 339,498 (+5.9%), the Honda Civic with 325,981 (-3.1%), and the Ford Fusion with 306,860 sales (+2.9%). Total sales for the year were up six percent to 16.5 million vehicles, a volume not seen since 2006, aided by a strong December that was up by 11 percent year-on-year. Ford was the top selling brand overall but sales didn't really budge from 2013, while Subaru rocketed up 21 percent to finish with 513,693 sales. At the precious end, BMW, Audi, Porsche and Land Rover all had record years, and Kelley Blue Book thinks we could be looking at 17 million sales for the next two or three years. Looks like it's time to start making hay again... Featured Gallery Best-selling vehicles of 2014 View 10 Photos News Source: Detroit News, Associated Press Auto News Chevrolet Ford Honda Nissan RAM Toyota Car Buying Truck Sedan sales

Chevrolet considering midsize crossover to slot between Traverse and Equinox

Crossovers are the new hotness, and automakers are looking to cash in by offering a size and shape for every customer. With Chevrolet's debut of the new 2018 Traverse in Detroit, which grew ever so slightly compared to the first-generation model, there is now a midsize-crossover-sized hole between the three-row Traverse and the compact Equinox. When asked about that obvious space, a Chevrolet spokesperson told us the company is looking into the possibility of expanding its crossover lineup. It should be a relatively simple thing to do, since all it would take is reskinning and rechristening the GMC Acadia with a bow tie, and we all know how much GM loves platform sharing. Although they're now different sizes, the new Acadia and Traverse still use the same platform; the Acadia is now on a short-wheelbase version of the C1XX while the Traverse uses long-wheelbase C1XX parts. A short-wheelbase Chevy built on the C1XX likely would be differentiated visually from both the Acadia and the larger Traverse. It may seem like flooding the lineup with more and more models would cannibalize sales of existing ones, but Chevrolet said it would rather have customers stay within the brand rather than going to another automaker. There have been whispers that some form of the Blazer name (possibly TrailBlazer) may make a return on a midsizer, but if it does don't expect an old-school body-on-frame SUV like the old one. In the end, if Chevy builds it, customers will come. Related Video: