2008 White Ltz 5.3l V8 4x4 Power Running Boards Dvd Navigation Xm Sirius Sunroof on 2040-cars

Auto blog

New Takata problem results in recall of 414 GM vehicles

An airbag-inflator rupture discovered by Takata during testing has resulted in a new recall affecting 414 vehicles from General Motors, including 395 of them in the US. This latest campaign covers 2015 model-year examples of the Buick LaCrosse, Cadillac XTS, Chevrolet Camaro, Equinox, Malibu, and GMC Terrain. There are no reported breaks in any of these vehicles on the road, and the company estimates only one percent of them actually have the faulty parts. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), one side-airbag inflator failed a cold test at -40 Fahrenheit "releasing high pressure gas and propelling the separated components apart." The supplier told GM about the failure the next day. In these vehicles, the safety device might not only burst but the bag could inflate incorrectly, as well. GM and Takata say that a cause is not yet known, but they are "conducting an investigation." GM will begin notifying affected owners via overnight mail on Oct. 19. Dealers will replace the side airbag modules on all of the affected vehicles with new components outside of the suspect lot. All of the removed parts will also be collected for further study. Takata's faulty front airbag inflators have resulted in a serious scandal for the supplier. Initial figures indicated 34 million US vehicles are need of repair, though more recent figures have knocked that down to 23.4 million bad parts in 19.2 million automobiles. GM was already among the dozen automakers with models to fix, and some of its pickups were affected, along with the Saab 9-2X and Pontiac Vibe. GM Statement: General Motors is recalling 395 cars and crossovers in the U.S. because one of the front seat side air bags inflators may be defective. In the event of a deployment, the air bag's inflator may rupture and the air bag may not properly inflate. The rupture could cause metal fragments to strike the vehicle occupants, potentially resulting in serious injury or death. GM is unaware of any incidents involving vehicles with these components, which were part of a lot in which one inflator failed acceptance testing at the supplier. Dealers will replace the side air bag module or modules in affected vehicles. Including Canada, Mexico and exports, the total population of the recall is 414, GM estimates 1 percent of the recalled vehicles may have the defect.

GM and Ford quarterly sales continue to slump in China

BEIJING — General Motors and Ford announced their quarterly sales in China fell, albeit at a slower pace sequentially, as the U.S. automakers were hit by a slowing economy amid the Sino-U.S. trade war. GM's vehicle sales in China for the quarter ended June 30 dropped 12.2%, while Ford's sales slumped by 21.7%. While GM also suffered from heightened competition in its key mid-priced SUV segment, Ford was hurt by the limited new models for customers to choose from. For the first quarter of this year, Ford's sales in China tumbled 35.8 percent while GM's skid 17.5 percent. Still, the numbers from GM, the second biggest international automaker in China by sales, and Ford portend more uncertainty for the industry which is trying to rebound from a downward spiral that led to its first annual sales decline last year in more than two decades. GM delivered 1.57 million vehicles in China in the January-June period this year, while Ford delivered 290,321 vehicles. China's factory activity shrank more than expected in June, highlighting the need for more economic stimulus amid higher U.S. tariffs and weaker domestic demand. Annual car sales in China fell last year for the first time since the 1990s, and they are expected to fall this year too. Sales tumbled 16.4% in May from the same month a year prior, the China Association of Automobile Manufacturers (CAAM) said. That marked the 11th consecutive month of decline and followed falls of 14.6% in April and 5.2% in March. U.S. car companies' share of total China passenger vehicles sales fell to 9.6% in the first five months of this year from 10.9% in the year-ago period, according to CAAM. Over the same period, German car makers' share has risen to 23.3% from 20.9% and Japanese auto makers' to 21.3% from 17.3%. CAAM is set to announce June sales next week, which industry analysts forecast will be negative.   New models In China, GM has a joint venture with SAIC Motor Corp, in which the Buick, Chevrolet and Cadillac are made. It also has another venture, with SAIC and GuangxiAutomobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of GM's affordable brand Baojun dropped 31.8% for the latest quarter. But luxury brand Cadillac's sales jumped 36.6%. GM sold 3.64 million units in China last year, down from 4.04 units in 2017. Ford makes cars in China through its joint venture with Chongqing Changan Automobile Co and Jiangling Motors Corp (JMC).

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.