2013 Cadillac Xts on 2040-cars

Auto blog

GM recalling 524k vehicles over hood latches and toe link nuts

Just hours after confirming to Autoblog its intention to recall 97,540 vehicles in the US (117,651 in North America) for a possible manufacturing defect in the chassis control module of several models, General Motors is issuing two more campaigns that affect another 379,401 units in the US (524,384 in North America).
One campaign covers 290,107 US examples of the 2010-2015 Cadillac SRX and the 2011-2012 Saab 9-4X because the "rear toe link adjuster lock nuts" may be improperly torqued. If not up to spec, the toe adjuster link could separate and allow the wheel to shift while driving, making the handling unstable. GM says that it knows of three crashes and two injuries as a result of this problem. Dealers are inspecting the nuts and installing a new link assembly, if necessary. Autoblog first reported about this potential issue when it showed up on a list of recalls from Transport Canada.
The second recall is for 89,294 examples of the 2013-2015 Chevrolet Spark in the US manufactured from January 17, 2012, through July 29, 2014. According to GM, "corrosion can cause the secondary hood latch striker to stick in the open position." If this happens, and the primary latch also isn't engaged for some reason, the hood could fly open while driving. About 13,000 of these affected Sparks are at dealers and are being held until repaired. The fix requires replacing the hood striker. GM isn't aware of crashes, injuries or fatalities caused by this problem.

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

Cadillac won't replace XTS after 2019

Cadillac wouldn't be Cadillac without a large sedan, but the definition of just which model fits that bill changed last week. Before the New York Auto Show, that role fell to the XTS. After the New York Auto Show, though, the focus shifted to the CT6. So what's to become of the XTS now that the CT6 has emerged? According to the latest intel, it'll live out the rest of its lifecycle until around 2019, but then drive off to its own funeral like so many limousines and hearses that were built off its platform. This was learned based on comments made by Cadillac chief Johan de Nysschen at the closed-door unveiling of the CT6 in Manhattan: "Ultimately, a car like XTS when it reaches the end of its lifecycle, will not be replaced." That'll be bad news for the livery business that – in the post-Town Car era – has come to rely on the XTS as the basis for its stretch jobs. "We will not have a car that will lend itself to these kind of modifications and we will probably withdraw from those markets," de Nysschen told GM Inside News. That's not all the new Cadillac boss had to say, though: he also indicated that the replacements for the ATS and CTS will be positioned differently from the current models: "As we move into the future refining our sedan portfolio, there will be no direct successor to the CTS. There will be no direct successor to the ATS. There is no point to renaming those cars because in the future those cars will disappear." Based on Johan's comments and those we've heard until now, we'd expect the replacement for the ATS to move down a size to take on the likes of the Audi A3 and Mercedes CLA, and the CTS' successor to move down half a size class as well to give the new CT6 a bit more breathing room, and possibly an even larger flagship sedan to be positioned above them all. Related Video: