on 2040-cars

Auto blog

Cadillac CT6 PHEV battery shape a big departure for GM's plug-in hybrid tech

Anyone with any familiarity with the electric powertrain details for the two General Motors plug-in hybrids will have noticed that the information we have about the newly announced Cadillac CT6 plug-in hybrid has a lot of numbers in common with the Chevy Volt and the Cadillac ELR, like the 18.4-kWh lithium-ion battery pack and an expected all-electric range of 37 miles. We also noticed that the announcement calls the plug-in CT6 hybrid an actual plug-in hybrid and not an "extended range electric vehicle (EREV)," which is what GM calls the Volt and the ELR. This, of course, means we needed to ask GM some questions. Donny Nordlicht from Cadillac communications told AutoblogGreen that while the Volt and CT6 batteries are both 18.4-kWh, the shape is completely different. In the Volt/ELR, the battery is T-shaped (see it here). The CT6 has four seats, with a tunnel running between the two in the rear, as you can see here, but the battery in the CT6 PHEV is "a cube-shaped pack, which is between rear seats and the trunk," Nordlicht said. "There is no pass through." GM has not yet released any technical schematics about this pack, but Nordlicht said that, "The CT6's advanced mixed-material platform was designed to accommodate the PHEV system by design so that it minimally intrudes on the cabin space." It also means that the CT6 can be ordered as an optional PHEV, while the Volt and ELR were purpose-built plug-ins. GM is also distinguishing between the EREV and PHEV powertrains in its vehicles from this point forward. "We are not discarding the EREV language," Nordlicht said. "The CT6 utilizes a two-motor system mated to a 2.0T 4-cylinder engine, which is an all-new system to Cadillac." We assume that the PHEV packs will use li-ion cells from LG Chem, just like the EREVs do, but Nordlicht did not answer our question on that point. As for other details about the CT6 PHEV – like production, full dimension, and pricing – we will just have to wait until closer to when the vehicle launches for those. Related Video:

2017 Cadillac XT5 shows off its new metal in LA

Cadillac is in the midst of a comprehensive production overhaul, and few of its new arrivals will be as pivotal as the new XT5. Replacing the old SRX, the XT5 was revealed in the metal here on the floor of the 2015 LA Auto Show. Joining the new CT6 under Caddy's new naming scheme, the XT5 represents GM's assault on German competition like the Audi Q5, BMW X3, and Mercedes GLC, Japanese rivals like the Lexus RX, Infiniti QX50, and Acura RDX, and its own cross-town nemesis, the Lincoln MKX. And to better fend off their advances, the new XT5 promises marked improvements over its predecessor in every way. The model you see here is, to our eyes, handsomer than the model it replaces, adopting the Art & Science brand's latest design cues. It offers a fresh cabin space loaded with the latest equipment. And it weighs a solid 278 pounds less than the outgoing SRX. Power still comes from a 3.6-liter V6, paired to an eight-speed automatic transmission with available all-wheel drive. 310 horsepower and 270 pound-feet of torque keep it going, which ought to help it keep pace with the competition. We're looking forward to seeing how it drives in due course, but in the meantime, you're invited to view our live photos from the floor of the Los Angeles Convention Center in the gallery above.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.