1984 Cadillac on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Is Cadillac working on an ELR-V? [w/video]

Could it be? Could Cadillac be working on an even higher-end version of its ELR plug-in hybrid? Well, General Motors' Executive Vice President Mark Reuss has gone on record as... well, not saying much. The exec was more than a bit coy on video (which you can view below) when asked about the idea of an ELR-V, although he did say that Cadillac was looking at "expanding the tuning envelope" for its plug-in coupe. What that means could be hinted at in these spy photos.
Cadillac is certainly up to something with this little red ELR. As is often the case, it's the car's enhanced brakes that give it away. Bigger binders are a telltale sign of sportier aspirations, and it's safe to say that rule applies with the ELR. The larger rotors and four-piston Brembo calipers are sourced from the Buick Regal GS, which we imagine would be plenty to bring the high-priced hybrid to a halt.
Obscuring those rotors and calipers are larger, double-armed five-spoke wheels. And, according to our spies, hiding behind that camouflage is a new grille. Outside of those two items, though, there's not much aesthetic change.

Hotter Cadillac ATS-V+ could use LS7 power

Rumor has it Cadillac is working on an even hotter version of the ATS-V, possibly called ATS-V+. And the latest intel from Motor Trend suggests this new model might have a great, big V8 under the hood. The V8 in question is the high-revving, naturally aspirated 7.0-liter LS7 from the Camaro Z/28. The hand-built engine makes 505 horsepower and 481 pound-feet of torque in the Z/28 – a nice increase over the 464 hp and 445 lb-ft in the standard ATS-V, which uses a twin-turbocharged 3.6-liter V6. Motor Trend says the ATS-V+ will come to market with an eight-speed automatic transmission, as well as the seven-speed manual 'box from the Corvette. A dual-clutch transmission will come to market later. Of course, we'll believe it when we see it. But an LS7-powered ATS-V sure sounds like a great package to us. Here's hoping.