95 Cadillac Seville Sts 56000 Miles on 2040-cars

Auto blog

2015 Cadillac ATS Coupe First Drive

Save for a few years of its century-plus existence, Cadillac has offered its unique brand of American elegance in two-door, fixed-roof bodystyles. Most of these cars were big, floaty barges, of course, though its most recent offering was the wedge-shaped CTS Coupe. But whereas the CTS Coupe was a statement car – angular and severe, with somewhat limited appeal except to design snobs and provocateurs – the ATS Coupe represents a return to form for Cadillac, with a proper three-box (engine-cabin-trunk) body and a slightly lower price point that should broaden its appeal among a larger swath of the market. Generally speaking, the 2015 ATS Coupe is a two-door version of the sporty ATS Sedan, though, surprisingly, the only common exterior components are the hood, headlamps, and sundry trim pieces on the front fascia (which features a slightly larger grille, a wider lower air intake, and the redesigned, laurel-less Cadillac crest). Even the mirrors are different. The body stretches 0.8 inches in length and 1.4 inches in width, the roof is 1.1 inches lower and the rear windscreen slopes at a flatter, sleeker angle. Interestingly, the windowsills are actually quite a bit lower, further slimming the car. Thanks to its 0.8-inch wider front and rear wheel tracks as well as more tumblehome in the C-pillar area, the coupe sits lower and looks more planted than the ATS sedan, particularly from the rear three-quarter view. Filling the wheel wells is a family of slick 18x8-inch wheels, with 18x9-inchers coming on the rear axle of performance models. Even if all those changes haven't resulted in a wholly new look the way the CTS Coupe departs from its sedan progeny, the ATS two-door is a truly beautiful car that looks considerably better on the road than on a show stand. And for that, Cadillac deserves mighty praise. The ATS two-door is a truly beautiful car that looks considerably better on the road than on a show stand. It is a proper coupe, of course, and as such is saddled with the expected limitations that accompany modern two-door packaging, notably rear seat access and limited rear headroom. Since the floorpan is common to both bodystyles, rear legroom is the same as the sedan's, though headroom shrinks a considerable 1.8 inches, making it hard for even average-sized adults to sit back there without their heads touching the window glass.

Cadillac to ditch China-only LWB models for global 'right size'

We often think of Buick being General Motors' poster child in China, but would it surprise you to hear that Cadillac is just doing a bang-up job in the People's Republic? It's true, the Standard of the World is on fire, and it's doing so with a surprising group of buyers that are going to push through globe-spanning changes for the brand. Cadillac's average buyer age in the People's Republic of China is just 34. Yes, younger buyers dominate the Chinese market, but according to Reuters, Cadillac's young buyers want to drive and they don't want the typical businessman's German-badged sedan. Cadillac understands this, and is setting about to exploit it with a shift in its Chinese strategy. According to President Johan de Nysschen, the company will begin moving away from the China-only, long-wheelbase models, like the ATS-L. Instead, it will push for a global "right size" design, along with some stylistic changes. "You will see a softening of some of the hard edges, and more three-dimension styling on the side of the car," de Nysschen told Reuters, while noting that the cars will still be "instantly recognizable as Cadillac." Even without these changes, though, Cadillac has bucked the trend in China. At 17 percent, the company's sales exceeded the PRC's overall market growth of 7.3 percent by a significant margin. In fact, Cadillac's 2015 gains outpaced the overall market growth in China over the past three years, as the brand jumped to nearly 80,000 units. And the company is hoping to push that even higher, Reuters reports, with President Johan de Nysschen targeting a 25-percent increase in 2016. Related Video:

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.