2005 Cadillac Sts V8 on 2040-cars

Auto blog

GM recalling Cadillac ATS, XTS, Chevy Impala over faulty brake lamps

General Motors has issued a recall covering 1,627 sedans over faulty brake lamps. Both the 2013 Cadillac ATS and XTS are affected by this problem, as is the 2014 Chevrolet Impala.
According to an official National Highway Traffic Safety Administration report, "the brake lamps may intermittently flash without the brakes being applied and the cruise control may disengage" on these vehicles. The report does not state that the brakes themselves are faulty, but rather that "if the brake lamps flash when the vehicle is not slowing, a following driver may not adjust vehicle speed when the vehicle is in fact braking."
This marks the first recall for the 2013 Cadillac ATS, as well as the recently introduced 2014 Chevy Impala. In late 2012, over 12,000 Cadillac XTS models were recalled due to a head restraint issue.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

This dream home theater and office happens to be in a Cadillac Escalade [w/video]

Need to take a ride cross country in the lap of luxury while still getting some work done? Short of a tour bus, the Concept One Curve from Lexani Motorcars might be one of the most comfy options imaginable. Lexani is usually known for creating opulent armored vehicles, but for the Concept One Curve it focuses on converting a 2015 Cadillac Escalade into a place for work or play. The company strips out the standard passenger compartment to install a higher ceiling with LED lighting, two leather-upholstered power captain's chairs and jump seats. However, the real highlight is a 48-inch curved 4K television mounted against the driver's partition. Don't worry about missing your favorite shows because there's a TracVision Satellite, too. The driver gets a re-covered seat of their own up front. If business needs to get done, the vehicle also includes a Mac Mini computer, tables stowed in the seats and connections for video conferencing. Of course, if you're riding in something this lavish, security might be a concern too. In addition to the window shades, the Concept One Curve features cameras to know what's going on outside. A touchscreen management system lets occupants control the whole setup from the luxurious chairs. Lexani claims that if all of this somehow isn't enough for a buyer, it offers even more options to fit their needs. Scroll down to watch a video tour and read more about this rolling home theater. {C} Lexani Concept One Curve Lexani Motorcars, a boutique luxury conversion company receiving vast international praise, has produced the Concept One Curve - the world's first 2015 Escalade with a built-in 48" 4K Technology Curved Smart TV. Lexani Motorcars is constantly pushing the boundaries of possibility for luxury transportation in everyday vehicles. The Curve is a revisited version of their latest model, the Concept One, with a television upgrade and electronic rear curtains; it is unmatched in its ability to be a premier theater one minute and a five-star mobile office the next. The curved smart TV-which rests on a proprietary electronic partition-is indeed impressive, but it is just one of the numerous amenities this discreet masterpiece boasts.