2012 Cadillac Srx Luxury Collection on 2040-cars

Auto blog

GM recalls 3.6 million vehicles for airbag-software problems

The Basics: General Motors is recalling 3.64 million vehicles across its lineup for an airbag-related issue. The recall covers the 2014-2015 Buick LaCrosse, Chevrolet SS, and Spark EV; 2014-2017 Chevrolet Corvette, Trax, Caprice PPV, Silverado 1500, Buick Encore, and GMC Sierra 1500; and 2015-2017 Chevrolet Tahoe, Suburban, Silverado HD, GMC Yukon, Yukon XL, Sierra HD, Cadillac Escalade, and Escalade ESV. The Problem: Affected vehicles have a sensing and diagnostic module that controls the airbags and seat-belt pretensioners. The software it uses has a defect that can prompt the module to run a diagnostic test under specific driving conditions, which will also deactivate the front airbags and pretensioners. This means that it would be possible for those safety systems to not activate in a crash, potentially leading to injury or death. Injuries/Deaths: General Motors began an investigation that led to the recall after a 2014 Silverado was involved in a crash in which the airbags did not deploy. No information was given as to injuries or deaths. The Fix: Owners can bring their vehicles to a local General Motors dealer where a software update will be installed to fix the issue. The fix will be free of charge. If you own one: General Motors will contact owners of affected cars, and owners can check whether their vehicles are affected by visiting entering their vehicle identification numbers at either the GM Owner Center website or the NHTSA website. Owners can then schedule a time to have the update installed. Related Video:

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

Lansing builds its millionth Cadillac

Cadillacs are built at plants across North America. The Escalade is assembled in Texas, the SRX in Mexico and the XTS in Ontario. But the bulk of Cadillac's lineup - or the smaller members of the family, at least - are built in Michigan. And while the upcoming ELR will be built alongside the Chevy Volt at the Detroit/Hamtramck facility (which incidentally opened with the Cadillac Eldorado back in '86), the majority of those Cadillacs built in Michigan are handled by the Lansing Grand River Assembly Plant.
In fact, Lansing Grand River just celebrated its millionth Cadillac built. The landmark millionth vehicle is a new 2014 CTS sedan in Red Obsession Tintcoat. The facility opened in 2001 and has built Cadillacs almost exclusively since then, assembling the CTS and ATS model lines, though in a couple of years it will also handle production of the Chevy Camaro.