2024 Cadillac Lyriq Sport 3 on 2040-cars

Auto blog

GM recalling 524k vehicles over hood latches and toe link nuts

Just hours after confirming to Autoblog its intention to recall 97,540 vehicles in the US (117,651 in North America) for a possible manufacturing defect in the chassis control module of several models, General Motors is issuing two more campaigns that affect another 379,401 units in the US (524,384 in North America).
One campaign covers 290,107 US examples of the 2010-2015 Cadillac SRX and the 2011-2012 Saab 9-4X because the "rear toe link adjuster lock nuts" may be improperly torqued. If not up to spec, the toe adjuster link could separate and allow the wheel to shift while driving, making the handling unstable. GM says that it knows of three crashes and two injuries as a result of this problem. Dealers are inspecting the nuts and installing a new link assembly, if necessary. Autoblog first reported about this potential issue when it showed up on a list of recalls from Transport Canada.
The second recall is for 89,294 examples of the 2013-2015 Chevrolet Spark in the US manufactured from January 17, 2012, through July 29, 2014. According to GM, "corrosion can cause the secondary hood latch striker to stick in the open position." If this happens, and the primary latch also isn't engaged for some reason, the hood could fly open while driving. About 13,000 of these affected Sparks are at dealers and are being held until repaired. The fix requires replacing the hood striker. GM isn't aware of crashes, injuries or fatalities caused by this problem.

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

It's going to cost $12 billion to fix Cadillac

The Cadillac CT6's development predates Johan de Nysschen taking over at Cadillac, but the forthcoming flagship is the luxury brand's first major new product launch since the beginning of his tenure. The vehicle's debut also marks the beginning of a comprehensive $12 billion renewal plan bringing eight new vehicles in the next five years. Now, the former Audi and Infiniti exec is talking about joining Caddy and the company's future. "Cadillac will be a powerhouse global luxury brand that will command the respect of its peers," de Nysschen said about the forecast state of the company in 2020 to Bloomberg. He disclosed that three of those new vehicles under the five-year plan would be crossovers and reiterated that plug-in hybrids are on the way that would take advantage of the Chevrolet Volt's tech advances. De Nysschen also reminisced about joining Cadillac last year. He told Bloomberg that leaving Infiniti wasn't an easy decision, and there were apparently long conversations on the phone with General Motors President Dan Ammann discussing strategy for the luxury brand. De Nysschen was apparently clear that a greater investment and more autonomy from the corporate mother ship were vital. These days, the revitalization of Cadillac is just getting rolling. The company has a swanky New York office with a dedicated team to focus on the future. According to de Nysschen, the brand will grow its staff to around 150 people by the end of the year, compared to over 40 now. The marketing plan is to position the American luxury brand as a more distinctive product versus more common German rivals. It's going to be very interesting to see if this new Caddy can dare greatly enough to accomplish these lofty goals.