2005 Cadillac Escalade Base Sport Utility 4-door 6.0l on 2040-cars

Auto blog

Junkyard Gem: 1976 Cadillac Eldorado Convertible

Convertibles rode high well in 1960s America, with Detroit selling more than 500,000 ragtops in 1965, but sales collapsed by the early 1970s and tightening federal crash-safety regulations made it seem less worthwhile to even bother producing new ones. Chrysler halted convertible production after 1971, with Ford following suit by 1973. By the 1976 model year, the Cadillac Eldorado was the last new American car you could buy with a convertible top from the factory, and it appeared that none would ever be built again. I've found one of those "last convertible" Eldorados in rough-but-identifiable condition in a Denver junkyard. As it turned out, the convertible never really died in America. Car shoppers could still buy new European-made convertibles after 1976, coachbuilders modified new Detroit cars with factory-grade drop-tops, and then Chrysler began selling K-Car convertibles starting with the 1982 model year. Because the '76 Eldorado appeared to be the absolute end of the convertible line, however, buyers thought they were investing in a sure-fire collector car that would be worth vast sums in the not-very-distant future (this belief led to lawsuits against GM later on, when the Cadillac Division resumed production of the Eldorado convertible for 1984). While a one-of-200-made Bicentennial Edition Eldorado with red-white-and-blue trim really is worth plenty these days, an ordinary 1976 Eldorado in beat-up condition doesn't seem worth restoring. This car appears to have sat outside in Colorado with the top down for decades, filling with snow each winter and enduring high-elevation solar irradiation each summer. A 1960s GTO or Camaro might be worth fixing up after falling into this state of disrepair, but not one of 14,000 "last convertible" Eldorados made in 1976. GM's Unified Powerplant Package front-wheel-drive system, which used battleship-strength chains to transmit power to the drive wheels, proved to be extremely reliable on the street, joining the small-block Chevrolet engine and Hydra-Matic transmission in the pantheon of The General's Greatest Engineering Hits. Even gigantic motorhomes used this system. In 1976, the Eldorado got the last of the 500-cubic-inch (8.2 liter, or litre as GM's marketers spelled it) V8s, rated at a disappointing 190 horsepower and an impressive 360 lb-ft of torque.

GM will likely build PHEV batteries in China soon

It's a big week for batteries. Friday, Tesla will hold a big event at its Gigafactory in Reno, NV. But even in Michigan, there are things happening on the electrified automotive front. This was proven when GM invited journalists to its Brownstown Battery Assembly Plant today, highlighting the six different battery packs it makes for nine vehicles around the world (plus a tenth, coming to Asia, that has not yet been announced). During our tour, we learned a few interesting tidbits that we thought readers would like to hear: The Cadillac CT6 plug-in hybrid launches in China this fall before coming to the US next year. GM builds the battery packs in Michigan and ships them to China for final assembly in the PHEV. For now, this is all fine for GM to qualify for China's incentives for building green cars in the country. But, as Bill Wallace, GM's director of global battery systems, told AutoblogGreen, this could change thanks to the country's 'Made in China 2025' plan. The situation is "evolving," he said, and it's a safe assumption that GM will need to build packs in China some day. For the CT6 PHEVs that will be sold in the US, the batteries will make a round trip, since GM will only build the plug-in version in China. As for the range of the CT6 PHEV, that hasn't been announced, but since China offers incentives for vehicles that get at least 50 kilometers (31 miles), that's a likely target (the US range (UPDATE: GM did announce an expected range for the CT6 PHEV in the US at the LA Auto Show last fall, saying it would "travel approximately 30 miles on a full electric charge"). The battery pack in the CT6 is also a clunky box-type thing, totally unlike the near-elegant T-shape used in the Volt. This despite the fact that the guts of the two packs are similar. Both have 192 li-ion cells and weigh almost the same, but GM tuned the CT6 pack for acceleration instead of range, the way it did with the Volt's pack. Still, the main reason the packs are different is because the CT6 is a rear-wheel drive vehicle, and the tunnel that the Volt's pack uses is occupied by the driveshaft. Despite the highly touted second-gen Chevy Volt going on sale last year, GM still has the capacity to build battery packs for the old, first-gen model. This is because the company is legally required to be able to provide replacement packs for warrantied vehicles (for up to 10 years), and the second-gen packs don't fit into the first-gen vehicles.

Cadillac SRX production moving to TN, next-gen Equinox going to Mexico

It's a good week for the town of Spring Hill, TN, as General Motors has announced that its factory in the city of 31,000 will receive a $185 million contract to produce engines. On top of that, the next-generation Cadillac SRX crossover will be built at the factory (NA models are presently built in Ramos, Arizpe Mexico), which was once famous for being the home of GM's now-defunct Saturn brand.
The factory is one of GM's six facilities around the globe that will screw together the company's new line of three- and four-cylinder Ecotec engines. Spring Hill currently builds the 2.0-liter, turbocharged Ecotec, as well as the naturally aspirated 2.4 and 2.5-liter variants.
Spring Hill's vehicle assembly lines were idled in 2009, but were reactivated in 2011. The SRX is just one of the products meant to benefit from last year's $350-million investment, and should have a positive impact, creating or retaining around 1,800 positions at the factory.