2004 Cadillac Escalade 7-pass Htd Leather Bose Only 78k Texas Direct Auto on 2040-cars

Auto blog

Cadillac confirms 420-hp twin-turbo V6 for 2014 CTS [w/videos]

The 2014 CTS will break cover next week at the New York Auto Show, but Cadillac has released a few details of what we can expect to find under the car's hood. As we saw in some spy shots back in January, the biggest news for the midsize Caddy will be a twin-turbocharged V6 producing a whopping 420 horsepower and 430 pound-feet of torque.
This LF3 engine will be paired to a new eight-speed automatic transmission, which will help balance performance and fuel economy. We still don't know how much the 2014 CTS has grown in terms of size and weight, but General Motors says that new sedan will return 17 miles per gallon in the city and 25 mpg highway with the new engine to go with a 0-60 mile per hour time of 4.6 seconds - that means the new CTS will have the fuel economy close to the current base model sedan and acceleration not too far from the current CTS-V. General Motors also confirmed that this twin-turbo V6 will be available in the 2014 XTS this fall.
The next-generation CTS will carry over the 3.6-liter V6 from the current car (likely as a base engine) and also add the 2.0-liter turbo four-cylinder from the ATS. Check out all the details on this new engine and watch a few videos (including GM's nifty tilt rig) by scrolling below.

Why the 2015 Detroit Auto Show will be the best since The Crisis

The Detroit Auto Show clearly has its swagger back, and the 2015 edition will be a veritable feast for the enthusiast senses. We're talking serious performance, and it will be exhibited in a variety of forms. Sports cars. Supercars. Muscle-bound luxury cars. They're all set for splashy debuts in January in the Motor City. It's another signpost that companies have recovered from the global economic crisis that gripped the industry from 2008-09. For a while, automakers played it safe at Detroit and other shows. Environmentally friendly cars were important, especially for General Motors and Chrysler that were living on loans from Uncle Sam. Ford, Toyota and other companies generally focused on their best-selling or core models. With a few notable exceptions, recent auto shows have been a bit more buttoned-down than in the past. Boring probably isn't the right word, but austerity has been reality. That's changing. Car companies are making money. Sales are up. Aside from the many nagging recalls – and they are notable – the industry now has the time and energy to make performance cars a priority. That will be offered in hard evidence in Detroit. A year from now when we look back at this auto show, we'll sum it up with one word: Horsepower. But make no mistake, this isn't frivolous. Sports and luxury cars are expensive. They're profitable. They boost images and highlight strengths. With that in mind, here are five significant performance-oriented reveals to watch for when the show kicks off in less than two weeks. 2016 Acura NSX Acura's reborn NSX is a strong bet to earn plenty of votes for our Editors' Choice awards. It's one of the most anticipated – and strung-out – reveals of the year. Think back: we actually saw an NSX concept at the 2012 Detroit show, and Acura has spent the last three years teasing the car in a variety of ways. The slow burn, however, means we know a lot about the NSX. It's will use a mid-mounted twin-turbo hybrid powertrain and run with all-wheel drive. It will also wear an innovative zirconium e-coat paint, a new paint process that Honda says is more environmentally friendly. Honda has also said it will build the new NSX in Ohio, where a large part of the car's development work has been done. The original NSX was produced from 1990-2005 and helped establish Acura's performance credentials in the United States. It was a landmark car and a shot across the bow of Ferrari, Lamborghini and others.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.