08 Navigation Dvd Sunroof Htd Leather Quads 22's Net Direct Auto Sales Texas on 2040-cars

Auto blog

GM recalls 83,572 SUVs for ignition switch issue

General Motors is recalling 83,572 SUVs from the 2011 and 2012 model years over a potential ignition lock actuator issue. In affected vehicles, the actuator isn't the right size, which could cause the ignition to get stuck in the "Start" position, and then either due to a jarring event or a "cool interior temperature" the ignition could switch back to the "Accessory" position. Doing so would cause a loss of power assistance and the airbags might not deploy. This is a different ignition issue than the one that's been ongoing for the past year. GM said it expects that less than 500 vehicles suffer from the problem, but that the pool could include vehicles from 2007 through to 2014 that have already been fixed, but with defective parts. The 2011-2012 SUVs included in the National Highway Traffic Safety Administration notice: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. GM will notify owners and dealers will inspect the ignition lock housing to see if it needs a free replacement. RECALL Subject : Ignition Lock Actuator may Bind Report Receipt Date: DEC 30, 2014 NHTSA Campaign Number: 14V827000 Component(s): ELECTRICAL SYSTEM Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2011-2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. In the affected vehicles, the ignition lock actuator may bind, making turning the key difficult or causing the ignition to get stuck in the "Start" position. CONSEQUENCE: If stuck in the "Start" position, the ignition may suddenly snap back into the "Accessory" position, causing a loss of engine, steering, and braking power, increasing the risk of a vehicle crash. If the vehicle is in a crash, the air bags may not deploy, increasing the risk of occupant injury. REMEDY: GM will notify owners, and dealers will inspect and replace the ignition lock housing, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact GM customer service at 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14696 for the original equipment, and 14912 for the service replacement parts.

All-new 2019 Cadillac XT4 crossover debuts in New York

Cadillac spent years and years improving its mainline sedans, the CTS and ATS, turning them into awfully good impressions of BMWs from a few years before. The thing is, great sedans aren't selling, and crossovers sure are. Cadillac's XT5 is the only crossover in the lineup, something that's had American Cadillac dealers gnashing their teeth and wailing — although anyone they can upsell into an Escalade can staunch the bleeding. That brings us to the new XT4, which is smaller than the XT5 but even sharper than its bigger sibling. Let's take a closer look at this new two-row luxury crossover. For one, it's based on what Cadillac calls a unique platform. That may be true, technically, although it's likely related to the Equinox/Terrain on some level. Platforms are becoming quite flexible: Look at Volkswagen's MQB, under everything from Euro hatches smaller than our Golf to the three-row Atlas. Whatever else it is underneath the skin, all XT4s will share one powertrain: the corporate 2.0-liter turbocharged inline-four, paired to a nine-speed automatic transmission. View 14 Photos The engine puts out a healthy 237 horsepower and 258 pound-feet of torque, putting it just a hair underneath its closest domestic rival, the Lincoln MKC with the 2.0-liter EcoBoost. Of course, the 2.3-liter MKC beats the XT4 handily, but that's another story. Power is produced with the help of a twin-scroll turbocharger. All-wheel drive is available, with a driver-selectable rear axle disconnect to save a small amount of rolling friction. Cadillac estimates it'll be good for 30 MPG on the freeway, but we haven't seen official results to confirm that. A few other changes that'll affect driving: electro-hydraulic brake assist, a first for Cadillac and mainly a fuel-saving measure; and Continuous Damping Control, which alters the damper's valve continuously based on a number of parameters. It's almost certainly used here because it's lighter and less expensive than air suspension or MagneRide, and it is optional on XT4. CDC or no, all XT4s utilize a front strut and five-link rear suspension. All XT4s also ride on 18-inch wheels in various designs. The trim strategy is mildly interesting. The base model is the Luxury, and then you can choose a Sport (black exterior trim, unique wheels) or a Premium Luxury (bright trim and satin-brushed accents). The interior options are suitably upscale and premium, and we'll have more to say about them a little later when we can see this car up close.

Why GM will import the Cadillac CT6 PHEV from China

There's a clear-cut reason that General Motors is going to build its upcoming plug-in hybrid CT6 sedan in China. Sure, the car will be sold in China and the US, but the real reason for the "Made In China" stamp is environmental. If an automaker wants to build a new model in China, adding a green powertrain is an easy way to do that. The CT6 will have both a PHEV option as well as standard gas engine versions. David Leone, Cadillac's executive chief engineer, told AutoblogGreen recently that, "[China is] far more receptive to approving localized production of vehicle programs that have new energy vehicle powertrain applications." To put it succinctly, since the CT6 has a PHEV option, it is easier for GM to build all CT6 models in China. Some of them will then be imported to the US. "Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." "To bring any new car into China, to produce it, you need government approval," Leone said. "The government isn't interested in bringing many new cars to market that don't have new energy credits. [The CT6] also provides new energy credits that enables it to be an attractive, well-received product in China." Leone said that there are two main markets for the various CT6 models: China and the US. The car will arrive in the 2017 model year, so some time after the end of June 2016. There are other practical reasons to build the PHEV in China, like the cells in the battery pack. Those are provided by LG Chem, which makes some cells in Michigan but more in South Korea. And GM already builds cars in China through its joint venture with SAIC, Shanghai General Motors, or SGM. "In February 2013 we started making the XTS, in summer of 2014 we started making the ATS-L," Leone said. "We will be producing [the CT6] within a number of months. Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." The Chinese and US versions of the CT6 will be identical, Leone said. While some Cadillacs sold in China are slightly different than the US versions – the Chinese ATS is 77 millimeters longer, for example – the CTS6 PHEV will be exactly the same in both places, other than slight tweaks to the trim levels. Still, "more of our cars going forward will be the exact same car," he said. That doesn't mean that sales will be the same everywhere.