Vehicle Has Been Kept In A Garage And Is Ready For Its New Owner. on 2040-cars

Auto blog

Cadillac CT6 gets a plug in Shanghai, will come to US

Don't call it the third coming of the Chevy Volt. The unsurprising debut of the Cadillac CT6 PHEV in Shanghai today has a powertrain that sounds an awful lot like the one that can be found in the Volt and the Cadillac ELR. The plug-in CT6 – identical to the CT6 that debuted in New York earlier this month – has an 18.4-kWh lithium-ion battery (just like the 2016 Volt) and offers an all-electric range of around 37 miles. It also copies the "Regen on Demand" feature from the new Volt and the battery cells "use the latest generation cell chemistry found in other GM plug-in vehicles." But Cadillac President Johan de Nysschen doesn't see the two powertrains as similar in at least one important way. General Motors calls the Volt and the ELR "extended range electric vehicles" (EREV) but in a statement, de Nysschen says that the plug-in hybrid CT6 is, "an ideal platform for Cadillac to offer its first plug-in hybrid." That GM is using the PHEV terminology rather than EREV is going to be important to some, even if the practical difference is only semantic. And yes, we all understand the irony of de Nysschen – the same guy who has a history of speaking ill of plug-in cars – hyping them now. Back when he worked for Audi, he said the original Volt was too expensive for what it offered and was thus, a car for "idiots." Speaking in Shanghai today, de Nysschen said the new CT6 PHEV was, "an EV without any of the disadvantages or range constraints," according to Automotive News. If the batteries are similar to GM's other EREV/PHEV cars, the CT6 powertrain is at least different. The ELR uses a 1.4-liter engine, while the new Volt has a 1.5-liter four-cylinder mill. The CT6, on the other hand, has a 2.0-liter turbo four-cylinder engine with direct injection. There is also an "all-new rear wheel electric variable transmission (EVT) with exclusively designed motors," that will give the CT6 PHEV, "smooth, spirited acceleration." The EVT is a two-motor-unit that uses three planetary gears. Maximum overall system output is 335 horsepower and 432 pound-feet of torque. Perhaps most interesting for American audiences is the fact that GM's press release, available below, makes multiple references to US-market sales of the PHEV. Official details on the EV range and fuel economy will be made available closer to the car's US launch.

Weekly Recap: Car-pedestrian crashes remained elevated in 2014

The death of American Horror Story: Freak Show star Ben Woolf served as a reminder this week that car crashes involving pedestrians remain a problem, and a new study issued on Thursday reinforced that the situation isn't really getting better. The Governors Highway Safety Association found a slight decline, 2.8 percent, in the number of pedestrian deaths in the first six months of 2014. Fatalities dropped from 2,141 to 2,125 compared with the same period in 2013, though the association says it's a statistical wash when factoring in undercounting. Deaths are still 15-percent higher than in 2009. "The number of deaths remains relatively high and is cause for concern," wrote Allan Williams, who compiled the report and is the former chief scientist at the Insurance Institute for Highway Safety. This is the first look at data from last year, and the National Highway Traffic Safety Administration will issue its full-year results later. The GHSA found some progress on the roadways, as 24 states and the District of Columbia reported drops in pedestrian deaths. In some states, the problem isn't even a problem at all: Nebraska and Wyoming reported one fatality apiece, though large population centers in urban areas are where most accidents occur. "This is a clearly a good news, bad news scenario," Jonathan Adkins, GHSA executive director, said in a statement. "While we're encouraged that pedestrian fatalities haven't increased over the past two years, progress has been slow." Other News & Notes Cadillac previews CT6 during Oscars Cadillac previewed its upcoming flagship sedan, the CT6, in commercials that aired Sunday during the Oscars. As expected, the creased sedan carries on Cadillac's recent design language, and the car in the commercial looks like a larger version of the CTS and ATS sedans. The CT6 will be revealed this spring at the New York Auto Show and launch late this year. It will be assembled at General Motors' Detroit-Hamtramck factory on a rear-wheel-drive chassis, and the CT6 is the first car to use Cadillac's revised alpha-numeric naming scheme. The commercials also kicked off Cadillac's "Dare Greatly" campaign, which is the first with its new advertising agency, Publicis Worldwide. Honda unexpectedly changes CEOs Honda unexpectedly announced this week that it will change CEOs. Current chief Takanobu Ito will step down in June and be replaced by company veteran Takahiro Hachigo.

2016 Cadillac CT6 to get an aluminum body?

Well this is interesting: A hot-off-the-press report in Automobile claims the coming Cadillac CT6 will have an aluminum body. Most write-ups on the CT6 claim it will have a body that's a combination of aluminum and high-strength steel - Automobile itself wrote of "high-strength steel, aluminum, and steel stampings" in October. An all-aluminum body would be quite the reversal, contradicting the last four months of reportage and company statements on the matter. Mark Reuss, EVP of global development at General Motors, told The Detroit News in October, "We will create with the CT6, the world's most advanced body structure... [and] it's not aluminum. It's a stronger, smarter, safer premium luxury vehicle." It echoed the earlier Automobile story in saying the CT6 would use GM's "patented welding technology with high-strength steel, aluminum and steel stampings and castings." That same month, the Wall Street Journal ran a piece titled, "GM Won't Follow Aluminum Strategy in Future Cars," in which Reuss said, "making big statements around all carbon fiber, all aluminum, all magnesium, they're very interesting," and that GM wouldn't be doing it. That piece also circled back to a material mix and GM's special welding process, saying the CT6 "will have a body made of aluminum, high-strength steel and other materials, and will be 100 kilograms (220 pounds) lighter than a similar-sized car made of high-strength steel." We don't know what kind of body Cadillac's new assault on luxury is going to wear, but now we can't wait to find out. Featured Gallery Cadillac Elmiraj Sedan: Spy Shots View 22 Photos News Source: AutomobileImage Credit: Chris Doane Automotive Cadillac GM Luxury Sedan aluminum cadillac ct6