Pearl White on 2040-cars

Auto blog

Cadillac teases CT4 and CT5 V-Series Blackwing steering wheel

There's quite a bit that we know about the upcoming Cadillac V-Series Blackwing models. Thanks to spy shooters and prototypes, we've seen the CT4-V and CT5-V Blackwing out and about testing on public roads, which means we've seen the bronze wheels in staggered sizes. We've been told they will offer proper manual transmissions, and we know they will lap a race track quicker than the ATS-V and CTS-V they replace. And now we know what their steering wheels will look like. It's not much to base an entire teaser on, but there are a few interesting tidbits we can glean from Caddy's first official Blackwing tease. First, the wheel itself. It's leather wrapped (not Alcantra, at least on this example), it looks to have meaty bulges where you'll want to grip it, it has a red strip at the top to help locate straight ahead while driving aggressively, and it has a carbon fiber V-shaped spoke at the bottom. Finally, we see a prominent silver button labeled "V" on the left side that will allow drivers to quickly access V-Mode. To the right will be buttons for the Performance Traction Management system. Judging by the fuzzy background behind the wheel that shows some sort of digital gauge cluster, it seems that Cadillac may be aiming for a 200-mile-per-hour top speed for the CT5-V. That's not a stretch, as the last-generation CTS-V could hit that speed, too. Cadillac smartly took this shot in a way that blurs the center console, which means there's plenty more time to speculate on the transmission choices. Cadillac says the V-Series Blackwing models will be ready in time for the summer of 2021. Stay tuned. Related Video:  

GM's labor deal with UAW union on verge of ratification

Nov 15 (Reuters) - General Motors' tentative labor deal with the United Auto Workers (UAW) union closed in on ratification as the votes were counted on Wednesday. Following the approval earlier in the day by more than 60% of union members at the Detroit automaker's large Arlington, Texas, assembly plant, additional votes in favor have the deal close to clinching majority approval. The number of union locals, most of which are smaller, still to report vote totals is not large. After several large assembly plants voted against the deal earlier on Wednesday, some media had reported the deal was heading toward failure. But Arlington's support, followed by strong voting in favor by smaller warehouse and parts facilities, has put the deal on the brink of approval. This would mark the first ratification of a deal, which runs through April 2028, with one of the Detroit Three automakers. Ford and Stellantis voting is still under way, and workers at both companies were favoring ratification by comfortable margins. The UAW's GM vote tracking site currently shows approval of the contract leading by a 54% to 46% margin with almost 32,000 workers having cast votes out of about 46,000 UAW-represented GM workers. The Arlington plant, with about 5,000 UAW members, has the most of any GM plant. Voting officially ends on Thursday at 4 p.m. EST, although most votes will be cast on Wednesday. The UAW went on strike for more than six weeks against the Detroit Three, seeking better wages, working conditions and cost-of-living adjustments. All three companies agreed to tentative agreements about two weeks ago. Workers at other GM assembly plants voted against the deal, including 60% of workers at its Fort Wayne, Indiana, truck plant, 53% at its Wentzville, Missouri, plant, 58% of workers at GM's Lansing Grand River plant and 61% of workers at the Lansing Delta Township plant. Seven of GM's 11 assembly plants rejected the deal. In addition to Arlington, workers at plants in Detroit, Fairfax, Kansas; and Lake Orion, Michigan; approved the agreement. Only nine facilities are still listed without vote totals on the UAW vote tracker, including GM's Lockport, New York, components plant with about 1,200 members. Those voting in favor of the agreement have a lead of almost 2,500 and many of the facilities still to come include workers who stand to receive large pay increases upon ratification.

2017 Cadillac XT5 First Drive

Thousands of feet above the Pacific Ocean, the winding roads that lead to the summit of Palomar Mountain turn from undulating curves to tight, blind, hairpin bends. Most drivers along this route are looking for a chance to exploit the limits of their cars' handling as much as one can on public roads, while taking in the bucolic views and endless blue skies. Up here, taking the thrilling curves at high speed is best left for drivers of performance cars who have platinum health insurance, lest the possibility of rolling a vertical mile toward Hellhole Canyon Preserve (we are not making this up) is not a deterrent. How different the experience is when you've chosen to climb the mountain in the 2017 Cadillac XT5, the crossover that replaces the SRX in a growing lineup of refined and redefined XT-named utility vehicles. An instant reminder that this SUV is not a Lotus comes as we enter a corner with a smidgen too much gusto, the tires begin to claw for traction, and the seatbelts tighten with the grip of sudden death. A quick tap of the brakes releases the belts, but not before a bead of sweat forms on the forehead. The overwhelming feeling is one of being unsure if this exercise is out of the XT5's comfort zone, despite Cadillac's goal of hitting the high-achieving sweet spot of the sport-luxury crossover segment. You'll know that an XT5 isn't an SRX when you first see one, although the differences are harder to tell when the two are parked side by side. The XT5 is the second Cadillac model to arrive since the brand learned to speak with a New York accent (albeit an affected Soho dialect) and it's a key pillar to the brand's chances at worldwide success. In 2015, the final year of sales for the five-year-old SRX, Cadillac managed to sell almost 100,000 of them around the world – no small feat for a model about to be replaced, and proof of the crossover's relative freshness and its popularity in export markets like China. Like the SRX that precedes it, the XT5 will be available with either front- or all-wheel drive (a $2,645 option), but that's one of few commonalities with the outgoing model. A new, lighter chassis helps the XT5 shed about 300 pounds, although Cadillac favors high-strength steel for bodywork and leaves aluminum for the engine and interior trim. In line with the revised brand guidelines for naming, SRX evolved into XT5, leaving room for larger and smaller utility vehicles to eventually join the lineup.