2002 Cadillac Eldorado Etc 2002 Collectors Edition #1338 Coupe 2-door 4.6l on 2040-cars

Auto blog

Cadillac toned down ATS Coupe design due to customer feedback [w/poll]

Automakers always face a difficult decision when it comes to styling their cars. Design them too blandly and nobody will get excited about them. But style them too aggressively and they'll often end up turning off potential buyers.
Cadillac, for its part, is no stranger to aggressive design, but when it came to the new ATS Coupe, it elected to tone things down a bit. Speaking with The Detroit News in a wide-ranging interview, Cadillac design director Bob Boniface revealed that the original design for its compact coupe was edgier - closer to that of the CTS Coupe - with a wedgier profile, a more steeply raked beltline and a more severe grille. But potential customers surveyed in clinics apparently didn't like it. They found it looked heavy, inefficient and not fun to drive. So Boniface and his team literally went back to the drawing board and "took as much visual mass out of the car as [they] could." The resulting coupe, while handsome, looks far more similar to its four-door companion than did Cadillac's CTS.
What do you think, does the new ATS Coupe look just right, or is it too conservative? Voice your opinion in our quick online poll.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Semi-autonomous Cadillac CT6 has Batman's seal of approval

Earlier this year, Cadillac pushed the launch of its Super Cruise semi-autonomous technology back to 2017, but it looks like the automaker is still hard at work testing the system on its vehicles. Our photographers snapped a CT6 sedan with what appears to be the Super Cruise technology in broad daylight. The CT6 in the pictures, ignoring the massive equipment on the car's roof, appears to be stock. The barely camouflaged vehicle has more sensors on the front fascia and a black rear bumper, but other than those points, looks normal. Getting back to the massive piece of equipment on the CT6's roof. There's no way to definitively state what it is, but there appears to be four cameras on the corners of the rack. A sensor or camera is also fitted to the right side mirror, which is slightly camouflaged. With all of the wires from the roof going into the vehicle, there's a chance that the massive blacked-out piece of equipment on the roof could be used to gather data. While the equipment looks extremely scientific, someone at Cadillac must have a sense of humor, or be a huge fan of DC Comics, as a Batman's logo is prominently displayed on the roof-mounted gear. Cadillac announced its Super Cruise semi-autonomous technology two years ago. The system will be able to speed the car up, keep the vehicle in its lane, and slow it down. The goal, in 2014, was to introduce the technology in two years (2016), but the automaker delayed the tech until 2017. Related Video: Featured Gallery Cadillac CT6 Super Cruise Spy Shots View 13 Photos Image Credit: Spied Bible / Brian Williams Design/Style Spy Photos Cadillac Technology Autonomous Vehicles Luxury Sedan cadillac ct6 Super Cruise