1993 Cadillac Eldorado on 2040-cars

Auto blog

How Cadillac improved power output in 2016 ELR by 25 percent

Earlier this year, Cadillac announced that the 2016 ELR would come with a big price drop and a powertrain that packs 25 percent more power output. That's a lot more oomph, but it didn't sound like the Caddy engineers made any major changes to the engine or motors. So, what happened? Let's refresh our memories with the numeric details. The 2016 car is 1.5 seconds quicker to 60 miles per hour than the 2014 model (there was no 2015), down to 6.4 seconds. The 2014 put out 295 pound-feet of torque. For 2016, it will be 373 lb-ft. The specific breakdown of the various components in the powertrain has not been disclosed, but from what we can tell, the two electric motors and the 1.4-liter inline-four engine in the new ELR are not that much different than those in the old one. Sam Abuelsamid, senior research analyst at Navigant Research (and former writer here at Autoblog) said that any of the unspecified upgrades would be difficult to tell on a part-by-part basis, but the overall effect will be noticeable. "The changes to the ELR as I understand them are analogous to getting more performance out of a 1965 Mustang with the entry version of the 289 cubic-inch V8. You can replace the carburetor with a larger version that enables more air and fuel to flow into the engine, thus producing more power. The basic engine hasn't changed, but power capability is being unleashed by feeding it more." "Cadillac has changed components in the power electronics to enable more current flow into the motor and thus produce more torque. When you do this in the Mustang, you probably need to replace the rear axle gears and use a beefier clutch to transmit the power to the wheels. Similarly, the ELR probably has some upgraded clutches, bearings, and gears to withstand the increased total output." Cadillac spokesperson David Caldwell told AutoblogGreen in an email that the new ELR does indeed have more than just new lines of code. "One could not 'reflash' a previous ELR to get the performance of a 2016," Caldwell said. "If one only changed software you would not get the performance upgrade fully, as the 2016 creates higher current, more power. So these have been upgraded physically – hardware.

GM veteran Bryan Nesbitt tapped to head Buick design

General Motors styling veteran Bryan Nesbitt (pictured above) took over a new role on Monday as executive director of global Buick design and global architectures. Andrew Smith, who previously did that job and also coordinated the look for Cadillac, has remained in charge of the pen at Caddy with this shift. Nesbitt rose to prominence when he designed the Chrysler PT Cruiser, according to Automotive News. He joined GM in 2001 and has been there ever since in multiple high-level roles. In 2007, he was appointed vice president of design for North America and was later briefly general manager of Cadillac in 2009-2010. Nesbitt took over as the vice president of GM's international operations design in China in 2011. This shuffle also moves Ken Parkinson, currently styling boss for Chevrolet trucks, to China as design vice president there. In addition, John Cafaro becomes the person in charge of the look for Chevy globally, rather than previously splitting that role between cars and trucks with Parkinson. GM Global Design Leadership Changes – effective June 1, 2015. Bryan Nesbitt, Design Vice President, GM China will repatriate to North America and assume the position of Executive Director, Global Buick and Global Architectures. He will be located in Warren, MI. Bryan will be the design Champion for Buick in the US and China. Ken Parkinson, Executive Director, Global Chevrolet Trucks and Global Architecture will assume the position of Design Vice President, GM China. He will be based in Shanghai, China. Andrew Smith, Executive Director, Global Cadillac and Buick Design will assume the position of Executive Director, Global Cadillac. He will continue to be the design Champion for the Cadillac brand. In addition, he will continue to lead the Global Color & Trim team. He will be based in Warren, Michigan. John Cafaro, Executive Director, Global Chevrolet Cars will assume the position of Executive Director, Global Chevrolet. He will be the design Champion for Chevrolet. In addition, John will lead the exterior components and accessories team. He will continue to be based in Warren, MI. The roles and responsibilities of Helen Emsley, Mark Adams, Carlos Barba, Clay Dean, Michael Simcoe, and Teckla Rhoades remain the same. Related Video: The video meant to be presented here is no longer available. Sorry for the inconvenience.

GM will likely build PHEV batteries in China soon

It's a big week for batteries. Friday, Tesla will hold a big event at its Gigafactory in Reno, NV. But even in Michigan, there are things happening on the electrified automotive front. This was proven when GM invited journalists to its Brownstown Battery Assembly Plant today, highlighting the six different battery packs it makes for nine vehicles around the world (plus a tenth, coming to Asia, that has not yet been announced). During our tour, we learned a few interesting tidbits that we thought readers would like to hear: The Cadillac CT6 plug-in hybrid launches in China this fall before coming to the US next year. GM builds the battery packs in Michigan and ships them to China for final assembly in the PHEV. For now, this is all fine for GM to qualify for China's incentives for building green cars in the country. But, as Bill Wallace, GM's director of global battery systems, told AutoblogGreen, this could change thanks to the country's 'Made in China 2025' plan. The situation is "evolving," he said, and it's a safe assumption that GM will need to build packs in China some day. For the CT6 PHEVs that will be sold in the US, the batteries will make a round trip, since GM will only build the plug-in version in China. As for the range of the CT6 PHEV, that hasn't been announced, but since China offers incentives for vehicles that get at least 50 kilometers (31 miles), that's a likely target (the US range (UPDATE: GM did announce an expected range for the CT6 PHEV in the US at the LA Auto Show last fall, saying it would "travel approximately 30 miles on a full electric charge"). The battery pack in the CT6 is also a clunky box-type thing, totally unlike the near-elegant T-shape used in the Volt. This despite the fact that the guts of the two packs are similar. Both have 192 li-ion cells and weigh almost the same, but GM tuned the CT6 pack for acceleration instead of range, the way it did with the Volt's pack. Still, the main reason the packs are different is because the CT6 is a rear-wheel drive vehicle, and the tunnel that the Volt's pack uses is occupied by the driveshaft. Despite the highly touted second-gen Chevy Volt going on sale last year, GM still has the capacity to build battery packs for the old, first-gen model. This is because the company is legally required to be able to provide replacement packs for warrantied vehicles (for up to 10 years), and the second-gen packs don't fit into the first-gen vehicles.