1955 Cadillac Eldorado Convertible on 2040-cars

Auto blog

GM recalling 2013 Buick LaCrosse, Cadillac SRX over transmission software

The National Highway Traffic Safety Administration has issued recalls for the 2013 Buick LaCrosse and 2013 Cadillac SRX due to a problem with the software for the transmission controller. On about 27,000 SRX and LaCrosse models, the transmission could accidentally be shifted to Sport mode, which would reduce the amount of engine braking drivers experience.
NHTSA says this could increase the risk of a crash, but, fortunately, the required fix is simply an update to the software.
While we're on the subject of General Motors vehicle recalls, a small number (48) of compressed natural gas versions of the 2011 Chevrolet Express are also being recalled for a potential risk of fire or explosion. Yikes. Both official recall notices are posted below.

MIT puts V2V technology on its 2015 Top Ten list

Of all the technologies swimming around the automotive world, it is vehicle-to-vehicle communication that the Massachusetts Institute of Technology has fished out as one of its Ten Breakthrough Technologies of 2015. It joined emerging tech like brain organoids, supercharged photosynthesis, and Project Loon on the list, and got the nod over autonomous driving because, as the MIT Technology Review wrote, V2V communication "is likely to have a far bigger and more immediate effect on road safety." How so? Because actual cars transmitting data like their location, speed, steering angle, and state of braking to one another at least ten times per second provides a greater degree of awareness than sensor readings and algorithms. The US Department of Transportation and the National Highway Traffic Safety Administration have been working for years on standards and a regulatory schedule for introducing V2V to the marketplace, and Cadillac plans to incorporate V2V into at least one of its vehicles by 2017. Since we've begun the year with a number of stories of cars being hacked into, that got us wondering about the security of V2V communications. In a recent piece by our own Pete Bigelow on what motorists should know about getting their cars hacked into, he wrote that although cyber break-ins are extremely difficult, expensive, and time-consuming to do remotely, V2V is "one more conceivable avenue a hacker could use to impact multiple cars at a given time." So we spoke to Wilmington, Massachusetts-based Security Innovation about it. The automotive consultancy company has been working with the DOT since 2003 on V2V technology and the issues around it - namely security and privacy - and its chief scientist, William Whyte, is the technical editor of the Institute of Electrical and Electronics Engineers (IEEE) 1609.2 standard outlining its security protocols. Those protocols are expected to be finalized by the DOT toward the end of this year and then come into effect in 2016, and the company's Aerolink product is the security solution Cadillac will use. Whyte said, "If you hack into a car, V2V is the hardest place to start," and Pete Samson, the general manager of Security Innovation's automotive team, said "There are ten or 12 alternate attack surfaces" around the car that would make much easier targets.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.