1996 Cadillas Devile on 2040-cars

Auto blog

GM recalling 54k Cadillac SRX, HD pickup models

There are more recalls to report General Motors, but these latest actions pertain to newer examples of the Cadillac SRX, Chevrolet Silverado HD and GMC Sierra HD. With so much scrutiny on the company's recall strategy, GM is under increasing pressure to call in defective models more quickly, and it appears to be doing so here.
Here in the US, the automaker is recalling 50,571 Cadillac SRX crossovers from the 2013 model year fitted with the 3.6-liter V6 because the transmission control module programming can cause a three- or four-second lag in acceleration at low speeds. The explanation filed with the National Highway Traffic Safety Administration states, "if the following sequence occurs within two seconds: during an upshift from first to second gear (8-10 mph), the driver then brakes the vehicle to less than 5 mph, and then accelerates again," the delay can occur. According to Automotive News, the recall effects 56,400 vehicles worldwide, and the company is not aware of any crashes caused by the problem. The fix consists of a transmission control module (TCM) reflash.
In a separate recall, GM is repairing 51 Chevrolet Silverado HD and GMC Sierra HD pickups from the 2015 model year in the US. In vehicles with diesel engines and dual fuel tanks, the nuts that connect the fuel pipe to each side of the transfer pump between the tanks may be improperly torqued, which could cause a fuel leak. Obviously, this could be a fire hazard. The remedy is simply tightening the hardware. According to GM spokesperson Alan Adler, there have been no fires actually caused by the potential leak. "Only 21 of the trucks are in customer possession and they can be fixed anytime because there are no parts involved. The others are being fixed at dealerships," Adler said in an email to Autoblog.

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

New V6 engines are only the start at Cadillac

Cadillac debuted its new family of V6 engines Friday, but that's not all General Motors' luxury brand has in store for the coming years. The six-cylinder powerplants will certainly help Cadillac in the near term, but they're just two of the many parts of the company's future strategy. GM has invested $12 billion in Cadillac to help the brand grow over the next five years, and the company will launch eight new products between now and 2020. That all starts with the launch of the CT6 flagship later this year – a fullsize luxury sedan we'll see for the first time in New York on March 31. The CT6 will introduce several new features and technologies to the Cadillac range, and with its launch also begins the slow restructuring of Cadillac's model-naming system. The new nomenclature means CT and XT badges for cars and utilities, respectively. Cadillac says that of the eight new vehicles it plans to launch by 2020, five of them will be first-time offerings in market segments where the brand currently does not play. But it's not just about new products – new powertrains are an important part of the Cadillac story, too. After the new V6 engines – a naturally aspirated 3.6-liter and a twin-turbocharged 3.0-liter engine – launch later this year in the 2016 ATS, CTS and CT6, the company says it has a strategy for V8 power – possibly a twin-turbo application – as well as future electrification. Cadillac also says it's working on adding four- and six-cylinder diesel powertrains, though it's unclear which vehicles will make use of those engines. This new six-cylinder engine family is indeed important, with Cadillac's chief engineer, David Leone, calling it the "most advanced V6 in the industry." With 335 horsepower, the 3.6-liter engine is the highest output, naturally aspirated V6 powerplant Cadillac has done – and that's SAE-certified, and on regular fuel. Beyond that, the 3.0-liter mill (pictured at right) marks the first application of GM's active fuel management system on a twin-turbocharged engine. This means that when full power isn't necessary, the TTV6 can run as a 2.0-liter V4 in order to save fuel. New transmissions are also part of the V6 engine story. GM's all-new eight-speed Hydra-Matic 8L45 gearbox will be paired to the 3.6-liter V6, and the 3.0-liter TTV6 will use the company's existing 8L90 transmission that is already found in the Chevrolet Silverado and GMC Sierra pickups (with the 6.2-liter engine).