1969 Cadillac Coupe De Ville 1 Owner Car 101k Original Miles A/c Blows Cold on 2040-cars

Auto blog

Cadillac CT6 gets a plug in Shanghai, will come to US

Don't call it the third coming of the Chevy Volt. The unsurprising debut of the Cadillac CT6 PHEV in Shanghai today has a powertrain that sounds an awful lot like the one that can be found in the Volt and the Cadillac ELR. The plug-in CT6 – identical to the CT6 that debuted in New York earlier this month – has an 18.4-kWh lithium-ion battery (just like the 2016 Volt) and offers an all-electric range of around 37 miles. It also copies the "Regen on Demand" feature from the new Volt and the battery cells "use the latest generation cell chemistry found in other GM plug-in vehicles." But Cadillac President Johan de Nysschen doesn't see the two powertrains as similar in at least one important way. General Motors calls the Volt and the ELR "extended range electric vehicles" (EREV) but in a statement, de Nysschen says that the plug-in hybrid CT6 is, "an ideal platform for Cadillac to offer its first plug-in hybrid." That GM is using the PHEV terminology rather than EREV is going to be important to some, even if the practical difference is only semantic. And yes, we all understand the irony of de Nysschen – the same guy who has a history of speaking ill of plug-in cars – hyping them now. Back when he worked for Audi, he said the original Volt was too expensive for what it offered and was thus, a car for "idiots." Speaking in Shanghai today, de Nysschen said the new CT6 PHEV was, "an EV without any of the disadvantages or range constraints," according to Automotive News. If the batteries are similar to GM's other EREV/PHEV cars, the CT6 powertrain is at least different. The ELR uses a 1.4-liter engine, while the new Volt has a 1.5-liter four-cylinder mill. The CT6, on the other hand, has a 2.0-liter turbo four-cylinder engine with direct injection. There is also an "all-new rear wheel electric variable transmission (EVT) with exclusively designed motors," that will give the CT6 PHEV, "smooth, spirited acceleration." The EVT is a two-motor-unit that uses three planetary gears. Maximum overall system output is 335 horsepower and 432 pound-feet of torque. Perhaps most interesting for American audiences is the fact that GM's press release, available below, makes multiple references to US-market sales of the PHEV. Official details on the EV range and fuel economy will be made available closer to the car's US launch.

2016 Cadillac CT6 has arrived

We have known for a while that the 2015 New York Auto Show would mark the debut of Cadillac's latest flagship model. But after months of waiting as Caddy slowly revealed details, the 2016 Cadillac CT6 has finally arrived. The sedan is a technological tour de force for the brand and inaugurates a long list of new technologies. The CT6 will begin production at the Detroit-Hamtramck Assembly plant in late 2015 and will go on sale with three engine options. Caddy won't release final figures yet, but based on preliminary numbers, we know the base 2.0-liter turbocharged four-cylinder will make 265 horsepower. Stepping up to the newly revised 3.6-liter V6 will net buyers an estimated 335 hp, and finally there will be the 3.0-liter twin-turbo V6 with an output of around 400 hp. All of these engines will be mated to eight-speed automatic transmissions, and six-cylinder models will get standard all-wheel drive that will be able to constantly vary the power sent to the front wheels. Carrying those powertrains is the new, aluminum-intensive Omega architecture. In addition to the lightweight metal making up the platform, the entire exterior also uses it to provide an estimated curb weight of less than 3,700 pounds. The decision to shed mass makes the CT6 a featherweight in its class – for comparison, the lightest, six-cylinder Audi A8 weighs 4,365 pounds. The sedan rides on a 122.4-inch wheelbase and is 204 inches long. That makes the Cadillac about 1.3 inches shorter than the smallest BMW 7 Series, but the Caddy is projected to tip the scales at less than both the big Bimmer and even the 5 Series, too. Cadillac wants the CT6 to be a luxury sedan that drivers can enjoy. In addition to the low weight, there's an available Active Chassis System throughout the range with rear-wheel steering and Magnetic Ride Control. When combined with the all-wheel-drive system, it means every corner of the car is both driving and steering the vehicle. Inside, the CT6 offers a ton of tech and luxury. Drivers are held in massaging, leather seats, and rear passengers also get adjustable chairs that are heated and cooled. Quad-zone climate controls keep everyone comfortable. Plus, in addition to the 34-speaker Bose audio system and streaming rearview mirror, there are features like a 10.2-inch CUE infotainment system with a capacitive touchscreen and console-mounted touchpad. The display also shows a 360-degree view outside and can even record video when the security system is activated.

Why GM will import the Cadillac CT6 PHEV from China

There's a clear-cut reason that General Motors is going to build its upcoming plug-in hybrid CT6 sedan in China. Sure, the car will be sold in China and the US, but the real reason for the "Made In China" stamp is environmental. If an automaker wants to build a new model in China, adding a green powertrain is an easy way to do that. The CT6 will have both a PHEV option as well as standard gas engine versions. David Leone, Cadillac's executive chief engineer, told AutoblogGreen recently that, "[China is] far more receptive to approving localized production of vehicle programs that have new energy vehicle powertrain applications." To put it succinctly, since the CT6 has a PHEV option, it is easier for GM to build all CT6 models in China. Some of them will then be imported to the US. "Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." "To bring any new car into China, to produce it, you need government approval," Leone said. "The government isn't interested in bringing many new cars to market that don't have new energy credits. [The CT6] also provides new energy credits that enables it to be an attractive, well-received product in China." Leone said that there are two main markets for the various CT6 models: China and the US. The car will arrive in the 2017 model year, so some time after the end of June 2016. There are other practical reasons to build the PHEV in China, like the cells in the battery pack. Those are provided by LG Chem, which makes some cells in Michigan but more in South Korea. And GM already builds cars in China through its joint venture with SAIC, Shanghai General Motors, or SGM. "In February 2013 we started making the XTS, in summer of 2014 we started making the ATS-L," Leone said. "We will be producing [the CT6] within a number of months. Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." The Chinese and US versions of the CT6 will be identical, Leone said. While some Cadillacs sold in China are slightly different than the US versions – the Chinese ATS is 77 millimeters longer, for example – the CTS6 PHEV will be exactly the same in both places, other than slight tweaks to the trim levels. Still, "more of our cars going forward will be the exact same car," he said. That doesn't mean that sales will be the same everywhere.