1966 Cadillac Deville Convertable Custom Paint New Interior And Top New Tires on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Cadillac president de Nysschen says electrification coming 'across the spectrum'

We like to pick on new Cadillac president Johan de Nysschen for his insistence, many years ago, when he was president of Audi of America, that plug-in vehicles are for idiots. Listening to him give the keynote address at the Washington Auto Show today, you wouldn't know he ever said anything negative about an electric vehicle. Instead, he sounds something like a EV-angelist. De Nysschen said that Cadillac will be able to benefit from GM's considerable expertise in plug-in technology, which he said would be "applied across the spectrum of our portfolio." GM's electric committment will help in "making electrification commonplace." With the plug-in ELR already on the road, de Nysschen said that the company's next step in advancing powertrains will be the introduction of stop/start technology – which de Nysschen called an "important system to reduce fuel consumption and CO2 emissions" – into a Cadillac for the first time later this year. Without giving any specific details, de Nysschen said that Cadillac will introduce eight new models (not necessarily plug-ins) by the end of this decade, including five that "will take Cadillac into market segments where the brand is not even present today." These new vehicles will likely be much lighter than today's vehicles, de Nysschen said, because "weight reduction today is critical to automotive design, it helps to improve fuel efficiency and contributes to desireable vehicle dynamics." The key is to reduce weight without compromising safety or comfort and to use the right material – steel, aluminum, carbon fiber – in the right place at the right time. It was a not-so-subtle jab at Ford and its new aluminum F-150. "In the pursuit of weight reduction, some manufacturers have also opted for abandoning steel and have gone for an all-aluminum approach," he said. "At Cadillac, we believe that different materials each present particular advantages in specific applications. There is no single material that represents the optimum balance of the conflicting objectives of every single application." Related video:

Chinese-made Cadillac CT6 Plug-In starts US sales

General Motors has started US sales of the Cadillac CT6 Plug-In after taking its first domestic deliveries of the China-produced sedan last month. The model is GM's first new plug-in hybrid in the US since the automaker discontinued sales of the ELR extended-range plug-in last year. The arrival and sales, first reported by InsideEVs, were confirmed by Cadillac spokesman Andrew Lipman. Not surprisingly, the sedan isn't cheap, as the CT6 Plug-In is priced at $75,095, or almost $12,000 more than the gas-powered variant, though that figure doesn't include federal and state tax credits for electric vehicles. For that tab, buyers get a 335-horsepower luxury car that can go 31 miles on electricity alone, and 0-60 miles per hour in a little over 5 seconds. The model gives GM three plug-in vehicles to sell to the American public, or the same number US competitor Ford offers. InsideEVs estimates that about 100 of the sedans have been delivered to US dealers, so the car remains a relatively low-volume affair. By comparison, GM's Chevrolet division has sold 5,563 Volt extended-range plug-ins and 3,092 Bolt electric vehicles through March. Cadillac sold 534 units of the ELR in 2016 after moving 1,024 the previous year. GM opted to produce the plug-in hybrid in China because of that country's receptiveness to new models that feature alternative and environmentally friendlier powertrains. Additionally, such production shortens the distance to the CT6's battery maker LG Chem, which is producing the car's battery packs in South Korea. On that note, GM has previously estimated that the Cadillac CT6 Plug-In will move more units in China than in the US. Related Video: