1957 Cadillac Coupe Deville Documented Dusty Rose Low Miles *always Stored* on 2040-cars

Auto blog

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Cadillac XTS to become Opel flagship sedan?

According to Auto-News.de, Opel is considering using Cadillac's all-new big sedan, the XTS, as the base for its new flagship car, which would likely carry the name Omega.
WorldCarFans.com speculates that Opel could use GM's 3.6-liter direct-injection V6 that generates 304 horsepower or, possibly, a 2.8-liter turbocharged six-cylinder engine that creates 321 horsepower to power the vehicle. The European automaker could even use a 195-horsepower turbocharged four-cylinder engine in this application - fine, since many of Europe's largest sedans are powered by smaller, more efficient engines.
Regardless of power, the Omega could arrive at dealerships by the end of 2013.

2016 Cadillac CTS-V arrives with 640 hp, 200-mph top speed

Ask the company's executive team, and they'll tell you "this is the maximum Cadillac V-Series." It's the 2016 CTS-V sedan, and it packs the very best of what's possible at Cadillac. And the company says it doesn't think "anyone thought it was possible that we could push [the CTS-V] this far." The big news is what's underhood: General Motors' supercharged, 6.2-liter LT4 V8, tuned to 640 horsepower and 630 pound-feet of torque. That's 10 hp and 20 lb-ft less than the monstrous Corvette Z06, and the result is the most powerful car Cadillac has ever produced. With rear-wheel drive, launch control and the eight-speed automatic transmission (sorry, folks – no more manual transmission here), Cadillac says the 2016 CTS-V will sprint to 60 miles per hour in just 3.7 seconds, on its way to a top speed of 200 miles per hour. Naturally, Cadillac's engineers say they have tuned the CTS-V to ensure it can put all that power to the ground with the most precision and poise possible. That starts with the excellent Magnetic Ride Control active damping system (with a claimed 40-percent increase in responsiveness)and a 25-percent increase in structural stiffness that should improve overall handling and steering. What's more, a high-performance Brembo brake package comes standard, as do 19-inch alloy wheels wrapped in seriously sticky Michelin Pilot Super Sport tires that will reportedly offer 1g in lateral acceleration. Cadillac also says that all changes to the bodywork are functional. That includes a carbon-fiber hood, front splitter, rear spoiler and diffuser that are super light and aid with aerodynamics and weight reduction – all of which will be available as an optional package for folks who like the exposed carbon look. Inside, it's more of what we're used to on lesser CTS models, but there's newly optional carbon fiber trim, microfiber suede upholstery trim, and some seriously awesome Recaro seats. Additionally, as we exclusively reported earlier, Cadillac will offer GM's Performance Data Recorder in the CTS-V. It records high-definition video with data overlays that's sharable via social media. Beyond that, Cadillac will offer the usual smattering of tech goodies, including Siri Eyes Free, OnStar with 4G LTE, CUE infotainment with navigation and Bose audio. The CTS-V will launch later next year, following the debut of the smaller ATS-V. In the meantime, the sedan will officially bow at the 2015 Detroit Auto Show in just a few weeks.