2010 Cadillac Dts on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Cadillac recalls 17,500 SRX CUVs in Canada

When reporting on recalls, Autoblog generally tries to focus on the US market. However, a recent campaign in Canada seems important enough to be worth mentioning because it could eventually affect American drivers. General Motors is repairing 17,481 Canadian examples of the Cadillac SRX from the 2010-2015 model years because of the possibility of a loose nut in the rear suspension. For the moment, the automaker hasn't yet announced whether the CUV in the US would require a similar campaign.
The notice was dated September 18, 2014, on the website for Transport Canada, similar to the National Highway Traffic Safety Administration in the US. It says, "the rear suspension toe link jam nuts" might not have been sufficiency tightened, which could allow a rear wheel to turn "inboard or outboard" while driving. If this happens, it could cause a sudden change in handling. Canadian Cadillac dealers are inspecting the parts and replacing the toe link if necessary.
This campaign isn't listed on the GM's running recall tally from September, which includes exported models, but it does list four other campaigns for the SRX this year - three in this range of years and one for the 2004-2006 model. Autoblog reached out to the company to ask about the possibility of this recall expanding to the US and were told "We have not publicly announced US recalls" for the issues affecting the SRX. The New York Times was given a similar quote. Scroll down to read the notice from Transport Canada.

Cadillac's Super Cruise — look, Elon, no hands!

Cadillac is about to start selling vehicles with an autonomous driving mode and TechCrunch got an early look at the technology in a production car. "Wait for the green light and let go," the Cadillac engineer instructed. That's it. The car was driving itself. I, the person behind the steering wheel, was no longer the driver. Cadillac's Super Cruise system was driving. The 2018 Cadillac CT6 sped along U.S. 23 under the direction of Super Cruise. Traffic was light and the weather was perfect. The system held the Cadillac sedan in lane and responded appropriately to traffic. I spent an hour on the expressway and touched the steering wheel and pedals only a few times. Super Cruise made the drive boring. I think that's the point. Here's how it works Super Cruise is available once the driver navigates the vehicle onto an expressway. When ready, a little icon is displayed by the speedometer and the driver hits a button on the steering wheel to switch it on. Once the light bar on top of the steering wheel turns green, the driver can let go. Super Cruise is driving.This steering wheel light bar is key to the operation. When green, the driver knows Super Cruise is in control. Blue means the driver interrupted the system to change lanes and red means Super Cruise needs the driver to confirm they're paying attention and not checking Twitter. When active, Super Cruise controls the steering and speed, but again, only on an expressway. This is done through onboard sensors and using GPS and mapping data. GM employed GeoDigital, a startup in GM Venture's portfolio, to map 160,000 miles of expressways in the U.S. and Canada. The car company then used Super Cruise-equipped vehicles to test each mile. This combination of onboard systems combined with map data makes the system feel polished and sophisticated. During my admittedly limited time in the vehicle, the CT6 precisely held its position in the lane and confidently handled sweeping curves at speed. There was no wiggling or squirming — from the Cadillac or myself. The car was in control, and I felt safe. Although the driving conditions were perfect for my test ride, during adverse weather, the system will work normally until one of the key systems is unable to operate.