'08 Dts / Deville 1sc Package - Loaded - Heated Front & Rear Seats + Alot More on 2040-cars

Auto blog

2014 Cadillac XTS gets 410-hp twin-turbo V6

General Motors told us so back in March, but it is now official: The twin-turbocharged 3.6-liter V6 announced for the 2014 Cadillac CTS will also join the options list for the 2014 Cadillac XTS. The LF3 engine puts out 410 horsepower and 369 pound-feet of torque in the XTS, however, which is 10 hp and 61 lb-ft down from its application in the CTS. It will be identifiable from the outside by a specific grille treatment and a badge on the decklid. The 3.6-liter V6 with 304 hp and 264 lb-ft holds steady as the standard engine, and both will be yoked to a six-speed automatic transmission with paddle shifters.
Also new for the front-wheel drive model for 2014 are updates that include electric power steering and optional Automatic Parking Assist that can maneuver the sedan into parallel parking spots. The three trims above standard - Luxury, Premium and Platinum - get Intellibeam headlights that automatically switch between high- and low-beam,
The four current trim levels remain but the list of optional extras for the higher specs grows with a rear-seat entertainment system equipped with DVD screens in the front seatbacks, memory settings for the front passenger seat and an armrest in the back seat fitted with radio and sunshade controls. The press release below has more info on all of the changes.

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.

Cadillac's Euro reboot may have implications for US models, sales

Firmly on the comeback trail in the US, Cadillac is still trying to get out of the starting blocks in Europe. At the Geneva Motor Show in March, Cadillac' senior execs revealed plans to grow the brand's presence in a luxury market dominated by the big three German marques, Audi, BMW and Mercedes-Benz.
GM President Dan Ammann says he sees "enormous" potential for Cadillac globally.
Over the past 20 years, the General Motors premium nameplate has tried and failed multiple times to break into the European market. This time around, Cadillac recognizes that progress will be modest at best, and depends on specific changes to models, some of which may impact the brand's US lineup. Planned new sales tactics in Europe may also impact the way Cadillac does business on this side of the pond.