2014 Cadillac Ats 2.5l on 2040-cars

Auto blog

GM recalls Chevy Impala, Cadillac XTS for braking problem

Back in April, General Motors launched an investigation into braking issues affecting the 2014 Chevy Impala. Now there's a recall of both the Impala and the Cadillac XTS with which it shares its Epsilon II platform.
The issue apparently revolves around the electronic parking brake, which may not properly disengage. As a result, the rear brake pads could rub the rotor even while the vehicle is in motion, causing "significant heat, smoke and sparks." The earlier investigation had been launched following a complaint regarding the forward collision avoidance system, which is now either appears to have been unrelated or possibly a symptom of this larger issue.
The recall affects 2013-15 XTS models manufactured between February 14, 2012, and August 22, 2014, as well as 2014-15 Impalas manufactured between January 15, 2013, and August 22, 2014. The total number of affected vehicles reported by the National Highway Traffic Safety Administration comes to precisely 132,921 units, while The Detroit News reports a higher total of 205,000 units - the difference potentially coming down to the scope within the US and more broadly across North America. Dealers will contact owners to update the software in order to fix the problem.

GM will likely build PHEV batteries in China soon

It's a big week for batteries. Friday, Tesla will hold a big event at its Gigafactory in Reno, NV. But even in Michigan, there are things happening on the electrified automotive front. This was proven when GM invited journalists to its Brownstown Battery Assembly Plant today, highlighting the six different battery packs it makes for nine vehicles around the world (plus a tenth, coming to Asia, that has not yet been announced). During our tour, we learned a few interesting tidbits that we thought readers would like to hear: The Cadillac CT6 plug-in hybrid launches in China this fall before coming to the US next year. GM builds the battery packs in Michigan and ships them to China for final assembly in the PHEV. For now, this is all fine for GM to qualify for China's incentives for building green cars in the country. But, as Bill Wallace, GM's director of global battery systems, told AutoblogGreen, this could change thanks to the country's 'Made in China 2025' plan. The situation is "evolving," he said, and it's a safe assumption that GM will need to build packs in China some day. For the CT6 PHEVs that will be sold in the US, the batteries will make a round trip, since GM will only build the plug-in version in China. As for the range of the CT6 PHEV, that hasn't been announced, but since China offers incentives for vehicles that get at least 50 kilometers (31 miles), that's a likely target (the US range (UPDATE: GM did announce an expected range for the CT6 PHEV in the US at the LA Auto Show last fall, saying it would "travel approximately 30 miles on a full electric charge"). The battery pack in the CT6 is also a clunky box-type thing, totally unlike the near-elegant T-shape used in the Volt. This despite the fact that the guts of the two packs are similar. Both have 192 li-ion cells and weigh almost the same, but GM tuned the CT6 pack for acceleration instead of range, the way it did with the Volt's pack. Still, the main reason the packs are different is because the CT6 is a rear-wheel drive vehicle, and the tunnel that the Volt's pack uses is occupied by the driveshaft. Despite the highly touted second-gen Chevy Volt going on sale last year, GM still has the capacity to build battery packs for the old, first-gen model. This is because the company is legally required to be able to provide replacement packs for warrantied vehicles (for up to 10 years), and the second-gen packs don't fit into the first-gen vehicles.

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.