Heated Seats Sunroof Rwd on 2040-cars

Auto blog

GM announces 3 new recalls affecting 1.7M vehicles in North America [w/video]

Still embroiled in the ongoing ignition switch recall, General Motors announced today three more discrete recalls, affecting a grand total of 1,546,900 vehicles in the US. The Detroit News reports that some 1.7 million vehicles are affected overall in North America. The first and largest of the trio of new recalls concerns some 1.18-million Buick Enclave and GMC Acadia crossovers from the 2008-2013 model years, Chevrolet Traverse from 2009-2013 (pictured above) and Saturn Outlook vehicles from 2008-2010. All of the crossover utilities may have an issue with the wiring harness for their seat-mounted side airbags. Apparently, the vehicles are equipped with a Service Air Bag warning light that, if ignored, "will eventually result in the non-deployment of the side impact restraints." Those restraints include the side airbags, a front-center airbag if the vehicle is so equipped and seatbelt pretensioners. Dealers of affected vehicles will be instructed to remove driver and passenger side airbag wiring harness connectors, and then "splice and solder the wires together." The second recall affects 303,000 Chevrolet Express (pictured right) and GMC Savana vans from model years 2009-2014, and with gross vehicle weights under 10,000 pounds. Said vehicles do not comply with a head impact requirement for unrestrained occupants, and will need a reworking of the instrument panel material to be sent back on the road. It doesn't sound as though there's a quick fix for this one, as the GM press release states: "Unsold vehicles have been placed on a stop delivery until development of the solution has been completed and parts are available." Finally, the third recall affects 63,900 Cadillac XTS luxury sedans from model years 2013 and 2014. A brake booster pump may be susceptible to corrosion by way of the relay, potentially causing and electrical short, overheating, melting of plastic components and even engine fires. GM says it is aware of two engine fires in unsold XTS models and two cases of melted parts. Repairs for the issues affecting the XTS have not not mentioned by GM in the release. The Detroit News is also reporting that along with news of the triple-recall, GM is taking a $300-million credit to help pay for the repair costs, and to deal with the ongoing costs associated with the ignition switch recall. In an attempt to explain just what GM has been doing in the face of these very serious issues, newly minted CEO Mary Barra has addressed the issues in a new video.

Cadillac CT6 PHEV battery shape a big departure for GM's plug-in hybrid tech

Anyone with any familiarity with the electric powertrain details for the two General Motors plug-in hybrids will have noticed that the information we have about the newly announced Cadillac CT6 plug-in hybrid has a lot of numbers in common with the Chevy Volt and the Cadillac ELR, like the 18.4-kWh lithium-ion battery pack and an expected all-electric range of 37 miles. We also noticed that the announcement calls the plug-in CT6 hybrid an actual plug-in hybrid and not an "extended range electric vehicle (EREV)," which is what GM calls the Volt and the ELR. This, of course, means we needed to ask GM some questions. Donny Nordlicht from Cadillac communications told AutoblogGreen that while the Volt and CT6 batteries are both 18.4-kWh, the shape is completely different. In the Volt/ELR, the battery is T-shaped (see it here). The CT6 has four seats, with a tunnel running between the two in the rear, as you can see here, but the battery in the CT6 PHEV is "a cube-shaped pack, which is between rear seats and the trunk," Nordlicht said. "There is no pass through." GM has not yet released any technical schematics about this pack, but Nordlicht said that, "The CT6's advanced mixed-material platform was designed to accommodate the PHEV system by design so that it minimally intrudes on the cabin space." It also means that the CT6 can be ordered as an optional PHEV, while the Volt and ELR were purpose-built plug-ins. GM is also distinguishing between the EREV and PHEV powertrains in its vehicles from this point forward. "We are not discarding the EREV language," Nordlicht said. "The CT6 utilizes a two-motor system mated to a 2.0T 4-cylinder engine, which is an all-new system to Cadillac." We assume that the PHEV packs will use li-ion cells from LG Chem, just like the EREVs do, but Nordlicht did not answer our question on that point. As for other details about the CT6 PHEV – like production, full dimension, and pricing – we will just have to wait until closer to when the vehicle launches for those. Related Video:

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video: