Cadillac Cts 3.6l Loaded Navigation Xenon Leather Carriage Top No Reserve on 2040-cars

Auto blog

Cadillac calling in 4,900 CTS-V models for brake issue

General Motors is recalling just over 4,900 first-generation Cadillac CTS-V sedans built between September 6, 2003 and June 11, 2007. The affected vehicles are largely registered in cold weather states where rock salt is used on roads. The salt could corrode the front brake hose's fitting in the brake calipers, which could lead to a brake fluid leak, the National Highway Traffic Safety Administration's bulletin reads. Needless to say, that would make slowing down the Corvette-powered Caddy a challenge. The affected vehicles were registered and/or sold in the following states: Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia. GM is set to begin notifying owners of the affected vehicles, who will need to report to dealers to have both front brake hose assemblies replaced. Repairs are, naturally, free of charge. Scroll down for the official NHTSA bulletin. Report Receipt Date: APR 15, 2015 NHTSA Campaign Number: 15V225000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 4,907 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2004-2007 Cadillac CTS-V vehicles manufactured between September 6, 2003, and June 11, 2007, currently registered, or originally sold, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, snow or water containing road salt or other contaminants may corrode the front brake hose fitting at the caliper. CONSEQUENCE: Corrosion may cause the brake system to leak which could lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: GM will notify owners, and dealers will replace both front brake hose assemblies, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15149. Note: This recall is an expansion of recall 10V-105. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

These are the top luxury cars bought by people entering the segment for the first time

Let's say you just got a big promotion at work or the kids are moving out of the house, and you finally have some extra money. You decide to blow it all at once and treat yourself by upgrading your ride. Naturally, you look to a luxury automaker. What do you choose?
Models like the Audi A3 and Mercedes-Benz CLA-Class may be tailor-made to introduce buyers to the premium segment, but a new study finds that they don't garner the highest rates of non-luxury customer conquests. It turns out that a Volvo leads among folks moving up to a premium brand, and it isn't even one that's made anymore, at that.
A recent study by Polk and IHS Automotive looked at what models had the highest rates of buyers upgrading from a non-luxury segment. The information comes from its new vehicle registration data through April 2014. All ten top models boasted conquest rates of over 50 percent, but the Volvo C70 led the field with 68.01 percent of its customers coming from non-premium brands.