2011 Cadillac Cts Sedan 4dr Sdn 3.0l Awd Traction Control Power Windows on 2040-cars

Auto blog

Cadillac Super Cruise, a hands-off review

Cadillac Super Cruise won't let you eat breakfast behind the wheel, climb in the back seat or any of the other stupid human tricks displayed on YouTube by Tesla owners. It even won't allow the car to change lanes on its own, like Tesla Autopilot. But it's a big step on the road to full autonomy, a huge convenience on long-distance road trips and a substantial technological triumph for Cadillac. In the simplest terms, Super Cruise is a lane-centering enhancement to adaptive cruise control (ACC). But Super Cruise is anything but simple. Its technical complexity — hence its long delay after first being unveiled five years ago — belies its straightforward operation and intuitive user interface, which I discovered on an almost 750-mile, 11-hour drive in a 2018 Cadillac CT6 between Dallas and Santa Fe to test the system. LOADS OF LIMITATIONS First, let's dispense with the details and disclaimers. Super Cruise is standard on the 2018 CT6 Platinum and a $5,000 option on other trim levels. Because Super Cruise is supported by OnStar — an OnStar operator will call to find out if first responders need to be sent in a worst-case scenario — a three-year OnStar Super Cruise Package is included with the system. Super Cruise has loads of limitations that are probably more concerning to GM's legal counsel than they were to me during my long drive. Some are no-brainers, such as not for use in construction zones or for driving on the shoulder. But the system can also be stymied by adverse weather, poor visibility and faded lane markings. Super Cruise only works on freeways with on and off ramps and a center divider. ACC and forward collision warning also need to be engaged, and the system's cameras and radar sensors can't be obstructed. To keep drivers from looking away from the road for too long — and to keep the system active — an infrared camera on top of the steering column keeps an electronic eye on the driver's seat. GM has over 100 patents alone on this Driver Attention System, including an algorithm that triangulates the nose, eyes and ears in case the camera can't see through sunglasses to make sure you're not nodding off. In addition to the car's visible sensors, another major component of the system is something you don't see: mapping software. But not the kludgy kind that powers in-dash navigation systems.

Cadillac CT6 will get high-res streaming video rearview mirror

Cadillac is preparing a big upgrade to the humble rearview mirror, adding a streaming video function that it claims will improve a driver's field of vision by 300 percent. The new system will debut on the 2016 CT6 flagship. The streaming system, which eliminates the visual obstructions caused by passengers, headrests and the rear pillars, relies on a 1280-by-240-pixel TFT display and a high-definition camera to reduce glare and improve visibility in low-light conditions. That camera even addresses one of the big annoyances of today's camera systems, by adding a hydrophobic coating to keep the camera lens clear. The system can easily be switched off at the press of a button, at which point the driver has a simple electrochromatic mirror at his disposal. "The closest comparison to this kind of rear vision would be driving a convertible with the top down," Travis Hester, the CT6's executive chief engineer said in a statement. "The streaming video is a significant enhancement for the luxury customer interested in purposeful technology." Scroll down for the press release from Cadillac. Cadillac Adds Streaming Video to Enhance Driver Vision and Safety Display eliminates visual obstructions, increases rearward vision by 300 percent 2014-12-18 DETROIT – Cadillac late next year will add high-resolution streaming video to the function of a traditional rearview mirror, removing obstructions of passengers, headrests and the vehicle's roof and rear pillars. The streaming video mirror improves field of vision by an estimated 300 percent, or roughly four times greater than a standard rearview mirror. "The closest comparison to this kind of rear vision would be driving a convertible with the top down," said Travis Hester, Cadillac CT6 executive chief engineer. "In addition to the increased field of view, the technology eliminates any rear seat, rear pillar or passenger obstructions, allowing the driver an unimpeded view of the lanes behind and traditional blind-spots," Hester said. Thanks to a high dynamic range, the camera's video feed reduces glare and allows a crisper image in low-light situations, versus a traditional glass electrochromatic, or auto-dimming, rearview mirror. The in-mirror display is an industry-leading 1280 by 240-pixel TFT-LCD display with 171 pixels per inch, combined with a HD camera designed specifically to enhance rear view lane width and maximize low-light situations.

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video: