2009 Cadillac Cts4 Awd 3.6 Direct Injection 6 Speed Automatic 304hp on 2040-cars

Auto blog

Cadillac CT6 gets a plug in Shanghai, will come to US

Don't call it the third coming of the Chevy Volt. The unsurprising debut of the Cadillac CT6 PHEV in Shanghai today has a powertrain that sounds an awful lot like the one that can be found in the Volt and the Cadillac ELR. The plug-in CT6 – identical to the CT6 that debuted in New York earlier this month – has an 18.4-kWh lithium-ion battery (just like the 2016 Volt) and offers an all-electric range of around 37 miles. It also copies the "Regen on Demand" feature from the new Volt and the battery cells "use the latest generation cell chemistry found in other GM plug-in vehicles." But Cadillac President Johan de Nysschen doesn't see the two powertrains as similar in at least one important way. General Motors calls the Volt and the ELR "extended range electric vehicles" (EREV) but in a statement, de Nysschen says that the plug-in hybrid CT6 is, "an ideal platform for Cadillac to offer its first plug-in hybrid." That GM is using the PHEV terminology rather than EREV is going to be important to some, even if the practical difference is only semantic. And yes, we all understand the irony of de Nysschen – the same guy who has a history of speaking ill of plug-in cars – hyping them now. Back when he worked for Audi, he said the original Volt was too expensive for what it offered and was thus, a car for "idiots." Speaking in Shanghai today, de Nysschen said the new CT6 PHEV was, "an EV without any of the disadvantages or range constraints," according to Automotive News. If the batteries are similar to GM's other EREV/PHEV cars, the CT6 powertrain is at least different. The ELR uses a 1.4-liter engine, while the new Volt has a 1.5-liter four-cylinder mill. The CT6, on the other hand, has a 2.0-liter turbo four-cylinder engine with direct injection. There is also an "all-new rear wheel electric variable transmission (EVT) with exclusively designed motors," that will give the CT6 PHEV, "smooth, spirited acceleration." The EVT is a two-motor-unit that uses three planetary gears. Maximum overall system output is 335 horsepower and 432 pound-feet of torque. Perhaps most interesting for American audiences is the fact that GM's press release, available below, makes multiple references to US-market sales of the PHEV. Official details on the EV range and fuel economy will be made available closer to the car's US launch.

Cadillac CT6 beefs up with 400-hp twin-turbo V6

Cadillac's engine lineup is set to get a makeover led by the potent powerplants under the hood of the CT6. Our man Steven Ewing is onsite at an event in Detroit reporting all the details. Here's what we know so far: The CT6's top engine will be a 3.0-liter twin-turbo V6. It's the first twin-turbo with cylinder deactivation, which essentially makes the V6 able to convert to a V4 unit. Power will be 400 horsepower at 5,500 rpm and 400 pound-feet of torque at just 2,500 rpm. No word on what a potential CT6-V would get. The CT6 will also have a naturally aspirated V6 that Cadillac is claiming to be all-new. It's rated at 335 hp at 6,800 rpm and 284 lb-ft at 5,300 rpm. That's an improvement of 14 hp and nine lb-ft compared with today's 3.6-liter V6, and fuel economy increases nine percent. Cadillac says it's the highest output for a naturally aspirated V6 that's SAE-certified and runs on regular fuel. Both of these V6s will have stop/start technology and will be paired to with eight-speed automatic transmissions. The 3.6-liter V6 will also be used in the 2016 CTS and the 2016 ATS. Meanwhile, Ewing reports that Cadillac says the ATS-V is actually more powerful than initially announced, though there are no numbers to flesh that claim out as yet. The brand also plans to offer four- and six-cylinder diesel engines in various vehicles and new V8 options. The CT6 bows at the New York Auto Show. It will use an aluminum-intensive body that reduces weight by 198 pounds compared with a steel setup and continues Cadillac's creased design language used on the CTS and ATS models. The CT6 goes into production late this year in Detroit. Related Video: Cadillac Next-Gen V-6 Engines Led by 3.0L Twin Turbo Segment-leading power, efficiency in world's most advanced six-cylinder DETROIT – Cadillac today announced a new generation of V-6 engines, led by an exclusive Twin Turbo V-6 that will be one of the industry's most advanced six-cylinder gasoline engines. It leverages the latest technology to balance efficiency, performance and refinement in the upcoming, top-of-the-range CT6 luxury performance sedan. The all-new Cadillac 3.0L Twin Turbo is designed to achieve new thresholds of refinement and specific output for the brand's new prestige luxury sedan, which makes its world premiere March 31, at the New York International Auto Show. Production begins late this year at General Motors' Detroit-Hamtramck Assembly Plant.

Cadillac considering more electric cars, Elmiraj business case gaining popularity

Cadillac's electrification isn't likely to stop at the $76,000 ELR coupe, according a report from TheDetroitBureau.com. Speaking to Cadillac's global sales boss, Bob Ferguson, a successful ELR will likely lead to a larger, even more upscale offering than the Volt-based two-door. "I could certainly see a larger vehicle, something even more luxurious," Ferguson said of a potential second, battery-powered Caddy.
That car would likely boast a more potent version of the Voltec powertrain that motivates the Volt and ELR. This next-generation system is still sometime off, though, and won't likely arrive until the second-generation Volt hits the market.
Besides hinting at future plug-in hybrids, Ferguson spoke to TDB about the improving business case for the Elmiraj Concept, shown at the Pebble Beach Concours in Monterey in August. "I'm very excited about the reception for the Elmiraj," Ferguson said. "I'd like to see it in showrooms as soon as possible," he added, before saying that a business case for the production version of the big coupe still needed to be presented to the brass. "It was made to be operationalized," Ferguson added, which is just what we want to hear when it comes to big, flashy concept cars.